LENOVO T1 S Pro – Fix Auto Empty Dust Bin Not Working

0:00
Hello. In today's video, I'll show you
0:02
how to uh fix the uh auto empty uh dust
0:10
bin to dust bag uh
0:14
not working on the Novo T1S Pro.
0:23
First of all, make sure your station is
0:25
plugged into power, which means that if
0:27
there's no robot in it, it should blink
0:30
white light like in this case, as you
0:33
can see. Then make sure that the um dust
0:39
bin is properly seated. As you'll see
0:42
the top of the station, you'll need to
0:45
make sure the dust bin is in there. So,
0:48
slide it in and then make sure that your
0:54
robot has an installed dust bin, which
0:57
means um if you go to the back of the
1:01
robot, you can remove the dust bin
1:04
>> and make sure it's installed properly.
1:08
>> Dust back. Then
1:13
try seeing if in the app it's selected
1:16
that the robot should automatically
1:19
uh empty the dust bin into the dust bag
1:24
uh after each cleaning task. To do it,
1:27
click on the settings in the top right
1:29
corner of the app. Then select more
1:31
functions and select dust collection
1:33
management. then set it uh to uh collect
1:37
dust after sweeping for one time and
1:40
then each time it will automatically uh
1:43
do it. Um I hope that this video was
1:46
helpful. Don't forget to like and
1:49
subscribe and I'll see you in the next
1:51
one.
1:53
Three videos. Three videos.
2:15
Hello. In today's video, I'll show you
2:18
how to fix your Lenovo T1S Pro battery
2:21
draining too fast.
2:29
If you have a high suction uh power mode
2:33
uh set on your robot, then very likely
2:36
the battery will go down more quickly.
2:39
So, you may want to set it to a medium
2:42
or low suction power by clicking here,
2:45
then selecting low suction, standard
2:48
suction, or maximum suction. The next
2:51
thing is make sure that before you start
2:53
a task, it is fully charged to 100%.
2:57
Otherwise, the robot will likely finish
3:01
before uh cleaning the whole apartment.
3:06
Then the next thing is to try to restart
3:10
the robot. Sometimes it may fix the
3:12
issue. To do it, you'll need to press
3:14
and hold on the power button until it
3:17
says goodbye and then wait a minute and
3:20
press and hold again until it starts
3:23
blinking and it plays a chime and turns
3:28
itself on. And if none of that helped,
3:30
the last uh thing you could do is click
3:34
on the button in the top right corner of
3:36
the app, then more functions, and see
3:40
firmware update. If there is an update
3:42
available, you may install it to fix
3:44
some issues. I hope that this video was
3:47
helpful. Don't forget to like and
3:49
subscribe, and I'll see you in the next
3:51
one.

LENOVO T1 S Pro – Fix Auto Empty Dust Bin Not Working

hardreset.info

LENOVO T1 S Pro – How to Set Up Do Not Disturb Mode

How to Store LENOVO T1 S Pro When Not in Use

LENOVO T1 S Pro – How to Manually Empty & Clean Dust Bin

LENOVO T1 S Pro – How to Create a Map

LENOVO T1 S Pro – How to Use Auto Empty

LENOVO T1 S Pro – How to Use Manual Remote Control in App

LENOVO T1 S Pro – How to Clean Sensors and Drop Detectors

LENOVO T1 S Pro – How to Fix Stuck on Error Code

How to Fix Wheel Error on LENOVO T1 S Pro

LENOVO T1 S Pro – How to Position the Dock

XIAOMI 17T Pro – Speaker Not Working? How to Fix

How to Take a Screenshot on MOTOROLA Edge 70 Pro

MOTOROLA Razr 70 Ultra – How to Fix Apps Crashing on Foldable Display

MOTOROLA Razr 70 Ultra – How to Prevent Scratches on Cover Screen

VIVO X300 FE – How to Fix Screen Freezing and Lag

Up next in 10

LENOVO T1 S Pro – Fix Auto Empty Dust Bin Not Working

hardreset.info