0:00
Hello everybody, welcome back to the 360
0:02
info channel. In today's video, I'll
0:04
show you how to fix headphones not
0:05
detected on your OnePlus Nord 6.
0:13
So first, what you guys want to do is if
0:14
you're using USB-C headphones, then
0:16
first clean the charging port because
0:19
dust can block a lot of connection.
0:22
That's why we have a port at the bottom
0:25
right here. As you guys can see, my port
0:28
is clean. You guys can see it through
0:31
And if your port isn't and you see some
0:34
slight uh visible debris or dirt or
0:38
anything, make sure to clean it up with
0:40
a soft brush or an air compressor. Air
0:42
compressor may be better here.
0:44
And after that, what you guys want to do
0:46
is restart the phone to refresh the
0:48
system. So we're going to press the
0:49
power button, volume up button, and
0:52
swipe up to restart it.
0:55
Now, the phone is restarting and I'll
0:58
see you guys in a second once the
1:06
After the restart, if you're using an
1:08
adapter to get your 3.5 mm jack to work,
1:12
then make sure you're using an original
1:13
one or a certified adapter because if
1:16
you're using a cheap adapter, it can
1:17
break down any second and you will have
1:22
Now, what you guys can do as a last
1:24
resort for the wired headphones is
1:26
update your phone software. So we're
1:28
going to go to settings and scroll all
1:30
the way down until we see system and
1:33
Click on software update right here and
1:38
Now, my version is up to date, but if
1:40
yours isn't, then I recommend you
1:41
updating. This is very important to keep
1:43
up with the latest version of the
1:44
software so that you don't have any old
1:46
glitches on your device.
1:48
And of course, you can also, as a last
1:51
resort, go to backup and reset, reset
1:53
phone, and click reset all settings.
1:57
So, this will basically um get rid of
1:59
everything, even the network settings.
2:02
And you can do that to check if your
2:08
Now, let's switch up to the Bluetooth
2:10
headphones. First, what you want to do
2:12
is we want to turn the Bluetooth off and
2:15
on. So, my Bluetooth is now enabled and
2:17
we're going to switch it off and switch
2:20
Now, what are we going to do is if we
2:22
got our um headphones paired, then we're
2:26
simply going to unpair them and repair
2:29
them again. So, as you guys can see, my
2:30
headphones are paired. We're going to
2:32
click on the information icon and click
2:36
As you guys can see, everything here um
2:38
just disappeared. So, now we have to
2:41
enter the pairing mode again. Depends on
2:43
your headphones. I do have the latest
2:48
And now we're going to click pair and as
2:50
you guys can see, now they're working.
2:54
So, what are we going to do next is if
2:57
that did not help, make sure that you
2:59
charge your headphones fully. Sometimes
3:01
my AirPods don't like connecting when
3:02
the case is lower than I think it was 10
3:06
or 5%. That's why I would recommend
3:09
charging the case and headphones. And
3:11
after that, make sure that you avoid any
3:13
other device interference. So, if your
3:15
headphones are paired to two devices,
3:17
then the second device may connect
3:19
instead of your OnePlus. That's why we
3:21
want to make sure that we avoid any
3:23
other device interference here. And of
3:25
course, as a last resort, what are we
3:27
going to do is we're going to go over
3:28
and scroll down to system and update
3:30
again. Go to backup and reset. Click on
3:32
reset phone and reset network and
3:37
Here, you enter the password, click a
3:40
reset, and now our Wi-Fi network and
3:43
every single Bluetooth device that we
3:44
had connected is gone.
3:47
So, now you can repair everything back
3:49
and everything will work. That's it for
3:51
the video. I hope it was helpful. If it
3:53
was, then leave a like, subscription,
3:54
and a comment, and I'll see you in the
