0:00
Welcome today I am with Motorola Motor G50 and I will show you how we can apply temperate glass on display in this phone
0:12
So at the first you have to prepare the good source of light. As you can see on my case I can spot few fingerprints and also some kind of the greasy marks and also few pieces of the dust
0:24
So we have to remove it. So right now we have to grab a box with the temperate glass, open it
0:29
open it there's the temperate glass itself and inside we can also find these two wipes wet and the dry as you can see
0:42
we are going to start from the wet one so let's open it and clean your screen with this wipe
0:53
that's very simple you have to make a few moves like that reach
0:59
corner edges and after a few seconds we get rid of all of this greasy marks
1:08
fingerprints and other stuff from our display so put back the wet wipe and go
1:15
for the dry one open the wipe and then just remove the rest of the wet clean So just do the same Reach corners and edges
1:37
And right now my display is in a really good condition. So right now we can simply move for the tempered glass
1:44
As you can see in this place we can find this sticker. This sticker is attached with foil
1:51
It's right here. We have to grab this sticker and remove it gently
1:56
Just like that. Do it slowly. You don't have to hurry. Okay, right now we have to keep hold, I mean just grab the glass like that in the four fingers
2:11
Hold the top and bottom part. Put at the first the top part of the glass on your screen
2:18
Just like that. Okay. And press with your finger. with your finger right here when you put it evenly for both edges
2:29
So basically when you put it correctly. Click and hold right here
2:35
Next take look at the bottom part. If everything is fine, just put the bottom part
2:44
And right now you can just take a look on the display
2:48
We can press right here in the middle. And I hope that you can see right now that it goes almost automatically
2:55
but you can also press on the screen to make it a little bit faster Okay as you can see right now the glass is sticking to our display but we got this kind of the marks under the glass it the glue marks and we can remove them by pressing on them just like that Take look
3:20
As you can see, they disappear. So I'm going to make it right now for the whole screen
3:25
And also in this time I'm going to turn on the device. I will show you that everything is fine with the touch sensitivity
3:33
So to remove this glue marks you have to press on the display. Oh
4:25
Okay and right now when you remove the glue marks you can take a look on the display
4:43
We can check the sensitivity of the display. As you can see, everything is fine, everything works, perfect
4:54
No problem with the touch interaction when you apply temperate glass. You can also check the front camera
4:59
the front camera, if there is no problem. Let's switch to the front camera
5:08
Let's click like that. Okay, and... Okay, right now the camera is turned on
5:22
As you can see, with the camera, with our front camera, everything is fine
5:29
That's the picture from the camera. Maybe it not looks the best because you know there's the flashlight just aiming on the display of the phone
5:40
But in the normal scenario you have to trust me that the photo looks really nice
5:46
There's no problem with the front camera. So yeah, that's how we can apply temperate glass on your Motorola Moto GF50
5:52
If you will find this video helpful, remember to love, comment and subscribe
