0:00
Here I have my phone go and let me show you how to bypass Google Verification on the following device
0:10
So as you can see at some point of initializing setup process you have to input your Google
0:15
email and password. Let me show you how to bypass it. So let's use the tutorial from hardwareset.info
0:21
Here we need to download a couple of things. The SP Flash Tool
0:25
The Android Scatterfile. We prepared the scatterfile just for the following model, my phone go, so you can use it only
0:31
for the following device. And we also prepared the drivers. So then let's install the drivers, let's unpack those two things and afterwards you can open
0:41
the SP Flash. So let's open the SP Flash Tool. Here I have my tool
0:47
Let's use the right click and choose Run as Administrator. Alright, before you do anything on your smartphone flash tool, let's just copy the scatterfile
1:03
and let me paste it into the SP Flash Tool. Right here, this is the SP Flash Tool directory
1:12
Let's paste it. And now we can go next, so you can go to the SP Flasher
1:21
Let's use the scatterloading. Let's load the scatterfile right here. This is my scatterfile
1:33
Let me just make sure that this is my appropriate scatterfile
1:48
Alright, so now let's go to the Format tab. Let's here choose Validation, select Manual Format Flash, let's leave eMMC user
2:00
Let's type in the Begin Address. We prepared for you Begin Address right here
2:06
This is the Begin Address for my phone go. So let me copy that one and paste it right here
2:14
Let's also copy the Format Length. It will be also in the tutorial, so let's use it from the Hard Reset Tutorial
2:24
And now you just have to press the Power key on your device, choose Power Off, wait until
2:31
your phone will be completely switched off. Let's press Start key right here on the SP Flasher
2:42
Now let's connect your device to your PC. Here I have my cable, so let me connect my phone
2:52
Alright, as you can see Format is done, so let's close this information
3:03
Now let's remove the device from the PC connection and now let's press together Power key and
3:12
Volume Up just to open the Recovery Mode. So let's hold down together Power key and Volume Up
3:23
Release both keys as soon as my phone logo pops up. As you can see the Android No Command logo pops up, so you have to start holding Power
3:33
key and by holding Power press Volume Up once. This is the Android System Recovery Mode
3:40
Scroll down and choose Wipe Data Factory Reset. You can scroll down by using Volume Down and confirm options by pressing Power key
3:47
Let's scroll down again by using Volume Down to yes delete all user data and press Power
3:52
button to confirm it. Right now the device is ripping all personal data
3:57
Let's press Power key to reboot system now. The device is restarting and booting into a normal mode
4:03
You have to wait a few seconds. As you can see the Welcome Panel just pops up, so let's just quickly go through the initializing
4:40
setup process. Let's choose your desired language, in my case it's English
4:46
Afterwards let's choose Get Started right here. Tap Skip inserting SIM card
4:54
Let's choose Setup as a new. Let me don't use any WiFi for setup
5:03
It's a good sign that we can bypass the WiFi connection. Tap Next a couple of times
5:11
Let me also skip the screen lock. Tap Setup later the following settings and that's it
5:18
The Home Screen just pops up, so it means that you just activated your device without
5:22
the Google account, so you just successfully erased the Factory Reset protection
5:27
Thank you for watching, please subscribe our channel and leave thumbs up under the video
