0:02
And filming is a Samsung Galaxy Note 10 and today I'll show you how to flash the firmware of the device
0:12
So before we get started there's a couple things we'll need. Number one, SD cable
0:16
Plug it into your computer and have it ready messade. Then another two things that we'll need are all the software for the phone
0:24
which you can get once you search for your device on hard reset
0:28
So open our new tab and just can show you a brief description
0:32
So we just type in for instance note 10. And then when you scroll down you can choose whichever one is yours
0:42
I already have mine open. It's the Exenaz one. And mind you that some of them, depending if it's the Exenaz
0:51
or SD-855, we'll have a different different model number and does also have a different file
1:02
So to check it, you would actually just go to your phone. You can do it two different ways, either from settings and go into settings, scroll down about phone
1:13
You'll have right here model number and right here it's the SMN970F
1:20
So as I said, it's the exonass one. And if I go right here to the firmware download, I'll see it
1:27
You speed the file. So download this. Now mind you, this will take probably a bit of a time, considering it's a five and a half
1:35
I think, gigabyte file. Then you also need to unrarr it. So yeah, get this one
1:44
And once you have this, you can also then download the Odin software
1:48
I'm just going to close this off. And you can either search for it or also get it from here
1:55
And I think there is this way that you have found. just to go through bypass Google verification and just tap on let's say number one and
2:03
there is a link for it so Samsung Oden software right here I'll need to just simply tap on
2:07
it and it will give you the newest version right here so you just download it and you can run it Now I already have both of those things so I don need to download anything and neither would you like to probably wait for 3D download
2:22
of 5.5 gigs of data. So, again, you can open up Odin
2:32
Once you have everything ready, keep it open like so. then we'll only need to put the device into
2:39
download mode so to do this we're simply want to shut off the device so
2:46
just pull down the notification panel and tap on the power button right there
2:51
and select power off like so and wait for the device to actually shut off
2:56
and once it has what you want to do now to put it into download mode is hold volume up and volume
3:02
down together when the device is off so I'm just going to do that
3:06
holding both of those keys volume up and down and while holding them I'm going to
3:11
plug it in the cable that is plugged into this computer right here and you'll see
3:15
that get this warning message right now so what you want to do is press a volume
3:20
up to continue and pay attention right to the screen now Oren right here where we
3:26
have ID com there's nothing there once I press volume up the device should show up
3:32
there it is now if you're not seeing your device from there you will need to download another thing also from the bypass which is the
3:41
USB drivers right here so get that installed it and I believe you also need to
3:46
restart your computer after installing them for them to actually work and then
3:51
you can proceed again with this process and Odin should be able then to see your
3:55
device right here so as you can see devices already recognized so now we want
4:04
to start adding the Samsung So tap on the BL and from the 5 gigabyte file that you have downloaded, locate wherever it is
4:14
so wherever you chose to save it go there and it this one it right here and then start selecting the files that you need to add So as you can see the BL you need to select that BL file right here underscore then AP
4:34
an AP underscore, and you have also, as you can see, it's the model number of the device
4:42
Now also mind that once you tap on the AP file, the program will freeze because it's one of the bigger files and it starts to process it
4:51
It doesn't really show anything. So as you can see, it just froze so the program is unresponsive
4:57
Now it will take about a minute or so for it to load it and once it has the program will unfreeze
5:02
and you can continue to add CP and SCS file. So let's wait for it
5:11
I also mind that the time it takes me to load this file may vary for you depending on how
5:17
good your computer is. Okay, so as you can see it's loaded
5:35
So now we can add CP file, select the CP right here
5:41
And last, CSC right here. I will top it. And once this is loaded, we want to go into the options right here
6:00
Yeah, so go to the options. And you make sure that auto reboot and f reset time is enabled
6:08
And once that's all set, you can then press on start. So I'm just going to start that
6:16
And as you can see, in the top left corner, In the top left corner you get a little progress bar of what's it doing right now and how much more it's left with
6:25
And once it done it will basically show you a message that is finished and the device will then reboot and I guess continue to do like a reset of it and then present you with the setup screen so let wait for the process to actually finish fully
7:05
I'm going to be. So, I'm going to be able to I'm going to be the
7:12
I'm not going to be. As you can see now the process is finished and you can set up your device
7:46
I'm just going to do a quick setup of it. So let me unplug it
7:53
Let's change the language to English. and now the device is ready to be used so that is how you would flash the firmware of the note 10 and if you found this very helpful don't forget to hit like subscribe and thanks for watching
