0:00
Welcome! In front of me I have Polar Ignite and I'm gonna show you how to
0:10
apply the screen protection like glass or foil on this watch to protect it from
0:15
scratches. Before we start you will need couple of things. You will need of course
0:19
the glass protection or screen protector basically glass, foil, whatever fits on
0:24
your watch and you will need something to clean your screen off with. I have
0:29
dry and wet wipes right here. You could also try to find area where you have
0:39
less dust in the air because if you try to put the screen protection on your
0:43
screen the dust will be kind of in your way and it's gonna be annoying if you
0:48
have dust particles on your screen and you put it on and you will see
0:51
the air bubbles under your screen protection. So try to find the dust free
0:56
environment. If you have hard time doing so you could also go to bathroom, run the
1:02
hot shower for couple of minutes to increase the humidity in your bathroom
1:07
This will cause the dust to not fly around so much and it should help with
1:11
the dust problem. Okay so once you have all of the things we can continue. So
1:17
first we need to clean the screen on our watch. I'm gonna use the wet wipe
1:22
first so I'm gonna grab it. Okay here we have it wet wipe. Let's clean the screen off like that
1:46
Swipe it for a couple seconds. Okay now let's grab the dry wipe and dry the
1:54
screen off like this. As you can see the screen is quite clean now. Make sure
2:02
there is no dust particles or hairs or something on the screen before you
2:06
apply the glass. You could use some kind of sticker to remove the dust particles
2:11
from your screen. For example piece of tape or something basically that is
2:16
sticky. You can press it on the screen on the dust particles and it should
2:20
catch them and take them off the screen. Okay now once you're done with
2:25
cleaning the screen, you cleaned off the screen and you got rid of the dust and hair. Grab your protector whatever it is. If it's foil or glass
2:35
just grab it. Take off the protective foil from the screen protector like
2:46
this. And this is the sticky part where the protection was on it. So take your
2:53
screen protector. Align it to your watch so it fits well and put it slowly
3:04
This didn't go too well as you can see it's a little bit out of... It could have
3:13
been done better honestly but it's not too bad. As you can see here we have a
3:17
little more space than on the bottom so I could move it a little to the top but
3:21
it's a decent work. As you can see there is no air bubbles under it and if you
3:27
have some air bubbles you can try to push them off by pressing your finger on
3:31
it and just trying to push it to the edge of the screen or rather the protector. And once you're done you can take another wet wipe again and
3:42
clean the screen protector. So it's clean so let's grab it and the dry one. And here
3:50
we have it. It's a little, like I said, misaligned. It could have been going a
3:57
little higher so there's no gap right here but it is what it is. It's not bad
4:04
honestly. Okay and that's how you apply the screen protection on this device
4:09
Thank you for watching. If you found this video helpful please consider
4:13
subscribing to our Channel and leaving a like on the video
