0:00
We are glad to welcome you on the Hard Reset YouTube channel and today I'll show how you
0:04
can set up this DJI Mini 3 Pro. So once you have taken the controller and the drone out of their respective box, you'll
0:17
need to first unfold your drone or actually before that take the protective cap from the camera
0:23
So just like that, take it off. Then unfold the top legs this way and those and the legs that are below them, you need
0:34
to twist them to the bottom in the opposite direction in order for them to be unfolded
0:41
So do the following movement. Now make sure to place your drone on an even, unobstructed surface so all its propellers
0:50
will not, nothing will stand in the way of those propellers I mean
0:56
Now when the remote controller goes, as far as the remote controller goes, you might have
1:00
gotten different versions of your controller. So either this newer one or older version which requires the phone to be mounted but
1:09
well the setup process is somewhat the same. The only difference is that you will need to download and install the DJI Fly app on
1:17
your phone before pairing and while setting everything up. But we have the whole separate video about it so check it out if you encounter any issues
1:24
with it. Now at the, either at the back of your controller or at the bottom, depending on which version
1:29
you have, you'll find the compartment for those dial joysticks. So take them out and then screw those handles into their respective positions here
1:42
So screw them in. Now you will need to power on both the drone and the controller which can be done through
1:54
let me finish screwing this handle first. So in order to power on your devices you'll need to tap at the power button once and then
2:06
tap the second time and hold. The same goes for this controller
2:11
So tap and then tap and hold. And now allow some time for both devices to switch themselves on
2:18
By default from the box they should be paired and once they both are activated, I mean enabled
2:25
they should interconnect automatically without any efforts on your end
2:39
So as you can see my drone and my RC has gotten connected already clearly
2:47
So here make sure if you have any issues like enable or toggle those things here, make sure
2:52
that you are not in the airplane mode of course before connecting those things the
2:59
first time around. And if the program or if the app will see any issues it will also send you messages
3:07
and notifications here which will help you to solve them so you can actually connect
3:13
your drone to your controller and start flying. So that will be it for this video guys
3:19
Thanks for watching. Thanks for your attention and bye bye
