0:00
Here I have Canon Elegance 5.0 and let me show you how to insert SIM and SD card in
0:11
the following device. At the very beginning hold down the power key for a few seconds, when the phone's options
0:16
appears on the screen choose power off and tap OK to continue the whole operation
0:22
Wait until your phone is completely switched off and afterwards let's remove the back cover
0:27
You have to do it by using the cavity at the right edge of your phone and simply use your
0:31
nail finger to open the whole item. Let's do it step by step from the bottom of your device to the top
0:44
Let's do it carefully. Excellent! Now you have access to your battery
0:51
Let's remove the battery by using the cavity at the down edge of the phone
0:57
And here you can input memory card and micro SIM card. At first let's input memory card, in that case of course it's micro SD with the characteristic
1:06
edge right here and simply put this card in that slot. Make sure it's pushed to the end and now you can insert here micro SIM card
1:19
Here I have one of the following card with the characteristic edge right here and simply
1:24
put this card in that position into the first slot. Let me show you
1:32
Then push it to the end. Make sure that both cards suits to your device
1:38
Then put back the battery. Insert the back cover protection. Make sure it's properly closed
1:51
And now you can switch on your device to check if both cards are working properly
1:56
So hold down the power key for a few seconds. The Kiano smartphone is turning on
2:00
Wait a couple of seconds. Then unlock the screen
2:09
As you can see the SIM card was detected so our SIM card was installed properly
2:15
Tap yes or no. Then go to settings, scroll down and choose storage
2:29
As you can see the device detects our SD card. So everything went well
2:34
Thank you for watching. Please subscribe our channel and leave thumbs up under the video
