0:00
Here I have BlackBerry Leap and let me show you how to insert here microSD and microSIM card
0:10
At the very beginning let's hold down power key for a few seconds
0:15
Keep holding this key for a few seconds just to switch off your device
0:20
And wait a couple of seconds until your phone will be completely shut down
0:39
Excellent afterwards you have to find the protection of your slots at the left edge
0:43
of the device right here. So let's open this protection by using your middle finger right here and now you have
0:50
access to your two slots. One is for microSD and one for microSIM card
0:55
At first let's insert microSD. Here I have my card with the characteristic edge right here and simply put this card in
1:02
that position right here. Let's push it to the end. You should hear the characteristic click and now your card is inserted
1:14
Let's now install microSIM card. Here I have my card with the characteristic edge right here and simply put this card in
1:21
that position. Let me show you. As simple as that right here
1:29
Just put this card in the first slot. And let's push it to the end
1:39
Have a look. It's inserted like that. So let's push it to the end as I said and you should hear also the characteristic click
1:53
Now you can close debug cover protection and let me switch on my device by holding a power
1:59
key and check if both cards are working properly. BlackBerry is switching on
2:24
Excellent now let's open settings. So let's swipe to the left, find and select settings
2:34
Then let's choose networks and connections. Choose mobile network and as you can see the device is reading our SIM card
2:41
We are connected to one of the available networks so that's a good sign
2:46
Let's go back and scroll down. Let me find and select storage and access right here and as you can see the device is
2:58
reading our media card so everything went well. Thank you for watching, please subscribe our channel and leave thumbs up under the video
