0:00
Here I have run of of Apple, let me show you how to insert micro SIM and micro SD card
0:09
into this device. At the very beginning hold down the power key for a few seconds
0:17
From the options on the screen choose power off and tap OK to confirm it
0:22
Wait until your device is completely switched off. And afterwards you have to prepare some tiny tool
0:28
It could be a special eject tool or some thumbertack. Just open this tray on the left edge of your device and simply press into this hole by
0:37
using this tool. Excellent. Now you can remove the whole thing from your device
0:44
And here you can input two micro SIM cards or one micro SIM and one memory card
0:51
So in this tutorial let me input one micro SIM card and one memory card
0:58
So let's start with SIM card. Here I have one of the following cards with the characteristic edge right here and simply
1:05
put this card in that position. Then let's input here memory card, in that case it's of course micro SD with the characteristic
1:17
edge right here and simply put this card like that. Now let's input the whole tray into your device
1:29
Let me show you. Let's do it like that
1:45
Let me correct my memory card. Excellent make sure it's properly located and then push it to the end. Excellent
2:00
Now you can switch on your device to check if both cards are working correctly
2:05
The Lenovo is turning on
2:14
Now let's unlock the screen. Tap apps icon, find and select settings
2:22
Then from the following list let's choose storage and as you can see the device is reading
2:29
some extra storage card so our SIM card was installed properly. And of course you can see at the top of the screen that the device is connected to one
2:38
of the mobile network so our SIM card was installed properly. Thank you for watching, please subscribe our channel and leave thumbs up under the video
