0:00
Welcome. So today I'll do unboxing now. I needed to make a little bit of more room on my desk right here because
0:16
you need to accommodate this absolute behemoth that takes basically half of my desk and can barely fit by the camera
0:25
So yeah. Not exactly sure how to go about it but Anyway, I'm just going to flip it over. I guess start opening it up and see what we get in there
0:34
I mean, it's kind of self-explanatory. As you can see, we get just two things and most likely cables
0:41
So anyway, just flip it over. A little knife. And move the light so it actually looks a little bit better
0:51
We have to open it on the side. No. Okay
1:03
You move the microphone a little bit, hopefully. Hopefully the mic won't sound like absolute crap, considering I'm a little bit above it than usually
1:13
So anyway, we get some paperwork. And we also get barely any light in here
1:20
So instructions, as to be honest, no one cares about this. I'm just going to eat that behind me
1:26
Then we got another box. I'm just going to set that to the side, because literally I have no space for it
1:34
I got some cardboard, I guess, just to kind of dampen it
1:39
So I'm going to take those out. There's nothing really inside of them
1:45
And then inside we got another box. I heard you like boxes
1:51
so I put a box inside of inside of your box how the hell do I must
1:55
just gonna flip it over hopefully that will help huh there we go
2:02
that was the way to go so that's basically all we get in a box
2:10
so I'm gonna toss it all these in this box so I'm gonna toss it to the side
2:14
and then we got two more so obviously one will have the... have the, what you call it, like pedals and the other one the stick and throttle
2:27
Where'd I put my knife? There we go. Okay so in here we get the petals
2:57
Well there's actually something on here. Oh it's a little all-end range
3:10
So you can tighten some bolts from there or maybe untighten them
3:15
Okay, just gonna set that to the side and move over to the pedals themselves
3:31
Again, nothing else in the box, so I'm gonna toss it to the ground
3:38
And also let's end this up. Come on, and there we go
3:45
Also, this can toss to this side as well. Let's open this up and we're in here we get... Oh
4:03
Please don't fall apart. There we go. And here we get the stick and throttle obviously
4:19
Okay, now I have genuinely no room to move around here
4:37
That's nice. I'm gonna zoom in the camera just a little bit
4:42
There we go. So now, that's a box
4:53
Okay, so let's just grab one of these. So obviously, this, I'm kind of holding it the wrong way
5:05
There we go, that's what's supposed to go. So obviously these are designed specifically for Xbox
5:15
So that's probably the benefit of them. I don't know if there's many other ones that support like Xbox or PlayStation
5:22
So that's a little bit of the question that I would need to probably go into
5:29
I personally have the, what is it, Logitech, Sytech, I guess collaboration, X-52
5:38
And they been working just fine though whatever I have doesn come with petals which is fine for me now anyway let get these styrofoam off of this There we go
5:51
So right of the bat, I'm going to be basically making a comparison to what I've been using all the time
5:56
which is, like I mentioned, Saitek x-52. And let's see, do we have any kind of tightening on here
6:03
It looks like we actually don't. That's kind of... that's not the greatest thing then
6:18
Okay, well, there we go, put them pop out. Okay, so the fraddle right here is just super loose
6:26
As you can see, it has a moment of lacking in a midpoint, obviously, so that's good, but outside of the
6:33
that point it's kind of like you can see that it just falls on its own same goes from the
6:38
other for the other side obviously apart from that it should work just fine it's nice that it actually
6:45
locks and it locks firmly in here so it's not going to fall out of this midpoint easily
6:52
and otherwise we also have several buttons on here we have uh bumper buttons i guess we have
6:59
x y and b on the side right here and then we get the
7:03
stick itself which wobbles because the cable isn't in here all the way
7:12
there we go hopefully that fixed it basically apart from that you have a couple
7:20
buttons right here specifically for Xbox obviously and you have a trigger
7:25
right here we got a couple buttons right here and one right here actually and that's basically
7:31
it now benefit of this one as you can actually connect these together. If you actually get the cable out, I think
7:40
Alright. Otherwise it kind of gets in the way. So let's just rip it out
7:48
Ooh, that's actually neat. I didn't realize that we have a way to shorten the cable right here
7:55
So you can just tie it around. So you can get it there. There we go
8:03
That is super neat. Actually I really enjoyed this. And from there, skip this other cable out of the way
8:14
And you can connect these into this claustrophobic one pack. Come on, how do you connect it
8:26
Oh, I'll need to remove those screws. That's why I does want to go in
8:30
Our screws are keeping it. But yeah, you just connect it together. and you have this like super combined like one piece and let move over to the petals themselves right here and there are the petals not much to them just
8:58
petals I can see some lubrication right here so I guess just kind of
9:03
be careful when I'm grabbing them and I'm going to get dirty but other than that it has some nice
9:08
parts of it um like I said I'm comparing it to what I have so the stick itself is actually feeling
9:18
robbery kind of mushy but it's quiet and it's something that I cannot say about for instance my
9:24
satech it's been like the plastic that is right here kind of starts rubbing and making it's kind of
9:32
adding some noise to it comparing to this being just fully silent and also having this rubber seal right here
9:38
but makes it feel a little bit better than what I have though in general this is what I would consider it probably the most budget setup
9:47
with the stick and throttle right here the throttle itself is probably one of the worst ones I just feel so cheap and bad
9:57
it's super plasticy has some weights to it it inside of this because the plastic itself don't feel like it's much. And obviously the PCB
10:08
in there won't be heavy either. So there is some kind of like added weight to it so it doesn't
10:13
slide around. The stick itself feels okay. It might be a little bit small for some people
10:20
You see it, it's fairly okay for my hands. I guess they have just like an average size
10:26
hands so it's okay but obviously people might might want something bigger or
10:33
with customization so they can shift this part right here lower or higher and
10:39
apart from that there's not much more to say so anyway that's about the
10:45
unboxing along with a quick overview I guess and I'm gonna add like I mentioned
10:52
before I don't know how many other options there are for Xbox
10:56
specifically, HOTUS setup, so I can't really give any kind of other recommendations
11:01
I haven't really doubled into this, so this is one that I know
11:05
It's literally on the box saying that it works with Xbox. So, yeah, if you're looking for something for your Xbox to play, there you go
11:16
Anyway, if you found this very helpful, don't forget to hit like, subscribe, and thanks for watching