0:00
Welcome, in front of me is a Redmi Note 11s and today I'll show you how you can
0:11
apply a tempered glass to this device. Now this logic will apply to any other
0:16
device but this is basically what I have right here and what I will be using for
0:20
this. So anyway, once you got your tempered glass right here, you can take it out, set
0:27
it to the side for now and in here you should also find, there we go, wet and dry
0:35
wipe. Now you could use those to be honest but if you have a microfiber
0:40
cloth I highly recommend using that instead. It will be much simpler, bigger and easier. Additionally sometimes the wet wipes right here are dry so they're
0:48
completely useless and all I do is just toss them out anyway. And one more
0:54
annoying part about these wet wipes and dry ones are the sheer size of them
1:00
I'm actually gonna quickly showcase this because they're so huge that it's just laughable. There you go, there is your wet one. Now it is actually wet
1:12
as you can probably see but what am I supposed to do with tiny little thing
1:18
like this. So there we go, I'm gonna be using a microfiber cloth for this. So you
1:24
want to basically get rid of all these smudges that you have on your screen. Make it as clean as you possibly can
1:34
Now if you have this plastic already applied to it, as you can see I have the
1:41
pre-applied protective film that comes with this phone by default, you can keep
1:46
this on. It won't really interfere in any kind of way if you want to
1:50
additionally add a tempered glass to it. It's not going to be visible in any kind
1:54
of way. So there we go. So anyway once you've got your screen completely cleaned
1:59
what you want to do is have your fiber cloth ready just in case any kind of
2:07
speck of dust settles on your screen. So anyway, basically as clean as it can get
2:13
Peel off the protective little cover, have it ready, give it a couple swipes
2:19
just to get rid of any kind of dust that might have settled and apply the
2:24
tempered glass. Now the way I like to do it is I just place it on an
2:31
edge and then drop it and as you can see it just starts spreading all around
2:40
So hopefully you did see that. And there we go. That's basically as
2:44
complex as it gets. Additionally I do recommend having your case on the phone
2:49
I do have one as you can see because it basically acts like a bumper for the
2:56
tempered glass. So if you place it too close to one edge the actual temper or
3:02
the case will prevent it from sticking to the to the actual phone which
3:06
then you can lift it up again and reorientate it just so it hits the glass
3:10
perfectly. So the case is really handy for that. So I don't recommend taking it
3:16
off. But anyway, that's basically how you apply a tempered glass to your phone and
3:21
if you found this very helpful don't forget to hit like, subscribe and thanks
