0:07
Today I am with Xiaomi Boko M3 Pro and I will show you how can apply temperate glass on display in this smartphone
0:14
So when you take a look on the screen for the first time you will find this kind of the protection
0:18
It's very thin foil. You can remove this foil by using your finger nails, so basically input your nail underneath the foil
0:26
But you can also leave it on the screen and apply on it the temperate glass. it to temperate gas so we will improve protection of your screen and that's what I'm going to do
0:33
right now. So we are going to apply temperate gas on this foil. You have to grab the box
0:40
with the temperate glass inside you will find the glass and also twolıpes wet and the dry
0:49
So right now we are start from the wet wipe. You have to remember to get a good lightning
0:56
condition like in my case to see a very mess that you have on the display. It's very important
1:03
Right now we can open this wipe and clean screen. You can start from the bottom for example
1:14
And after a few moves our screen is in a really good condition But right now we have to remove all of these wet marks So grab the dry wipe and just do the same
1:45
And right now, when you are sure that everything is fine with the display, we have to grab
1:52
this temperate glass. And we have to focus at the first on the sticker
1:59
We have to remove it, so grab it like that and remove it gently
2:07
In my case, this sticker is not going with this fold that is attached right here
2:13
So I have to remove this foil manually without using this sticker
2:17
How to make it? Take a look. You can start from one of the edge and put your fingernail right here
2:29
And there it is. I hope that you can see it right now. So normally when you grab this sticker right here this foil will also follow But in my case unfortunately it not happened so I going to remove it manually as you can see it not that hard so if you have the same problem don worry you can make it right now we have
2:48
to keep the glass right like that at the first we are going to start with applying glass from
2:54
the upper section so put this upper section of the temperate glass on your display just like that
3:05
You have to be sure that glass is applied correctly for the both edges
3:12
In my case everything is fine, so right now I'm going to put my finger right here in the middle
3:19
and I'm going to try to put the bottom part correctly. Okay, everything is fine so I'm going to put the bottom part
3:28
And take look right now. We can press right here. and it will go automatically as you can see
3:41
Oh sorry because the slides are just losing focus of the camera
3:52
But right now as you can see we got bubbles so how to remove them just press with your finger or fingernail to one of the edge and just remove it The same with this one
4:08
And that's all. Right now we have to remove these marks. They are under the glass and it's the rest of the glue
4:16
So grab the dry wipe and then just simply press on a very mark, on a very glue mark
4:25
Okay, and right, let's finish
4:43
Right now we can turn on the phone. Okay, it looks like this phone is out of the battery
4:55
unable to turn it on. Unfortunately I cannot turn this phone, but there is how we can apply the temperate glass on this
5:06
phone. If you find this video helpful, remember to love a like, comment and subscribe
