0:00
Welcome, Fenom is a Huawei P50 Pro and today I'll show you how you can insert a SIM card
0:14
into this phone. Now for this we will need a SIM eject tool
0:18
This thing comes provided in a box with the device somewhere between the paperwork so
0:22
you can get it from there. Additionally you could use a paper clip, straight on one of the ends and it should work just
0:27
as well. Now once you have one of these things you can pop out the tray
0:31
I'm going to unlock the device, take off the casing right here
0:36
And the tray is located at the bottom of the phone as you can see right over here
0:39
Now when taking out your SIM card you will see that we have a couple of little holes
0:44
right here. You want to poke the one that is part of the tray
0:48
As you can see it is just cut out right here. So you want to make sure you poke this one which is closer to the edge of the phone
0:57
And once you push the pin in you can see that the tray just pops out ever so slightly
1:02
Now you don't need to be worried about damaging this. If it's coming out kind of like tougher than you would expect just push harder on it
1:12
And in here we will have space for SIM card and also nano memory which is basically an
1:18
SD card pod designed by Huawei and probably not very many people will be using those
1:25
Now those memory cards from Huawei are basically the same size as a SIM card
1:30
Thus they can go both ways as you can see. They can place a SIM card on the other side with the nano memory and it will have dual
1:38
SIM support. Or you can place one SIM card and one SD card on either side
1:43
Now for the nano memory you do need to make sure you place it on the correct side
1:47
Only one of those sides will read it. And if you look at right here, if I can focus on it
1:53
There we go. So you can see right here we have NM written on it for nano memory
1:59
And if I flip this over you can see we have SIM1
2:04
So there we go. I will occupy the SIM1 tray like so
2:09
Make sure it clips in. It should lay flush on the tray and it should hold in there without any kind of problem
2:16
So from there once you have it on the tray simply insert it back into the device
2:23
And as you can see it automatically starts working. So for me I do need to put in my pin
2:31
And there we go. The SIM card is now working. I am in airplane mode so I am going to disable this
2:36
But there we go. That is how you would insert your SIM card into this phone
2:41
And if you found this video helpful don't forget to hit like, subscribe and thanks for watching
