0:00
Here I have Coolpad Modena and let me show you how to insert microSD and SIM card in
0:11
this phone. At first hold down the power key for a few seconds, then tap power off and wait until
0:17
your phone is completely switched off. Afterwards you have to go to back panel, use your nail finger to open a little bit the
0:26
back panel and then you have to use your other fingers to open the whole thing
0:32
You have to do it step by step from the bottom of your device to the top. Excellent
0:40
And now you have access to your slots. Let's insert here SIM card and SD card
0:51
I'm gonna start with microSD card. Here I have one. This is the characteristic edge of this card and you have to put it right here in the slot
1:00
at the bottom of your device and push it to the end. It's pretty easy
1:05
Now let's insert a microSIM card. Here I have one of the following cards
1:12
This is the characteristic edge and let me put it that way
1:16
This is the only possible way. You have to do it to the end of the slot. Excellent
1:21
Now let's insert the back panel and close it. And now we can switch on our device to see if both cards are working
1:33
The device is turning on. Excellent
1:44
Now let's go to settings and check if our SD card is working
1:50
From list of settings choose storage. And as you can see our phone is reading our SD card so everything went well
2:03
And also we can see that the phone is connected to one of the mobile network so our SIM card
2:08
is also working. Thank you for watching. Please subscribe our channel and leave thumbs up under the video
