0:00
Here I have AllView PAD Magic and let me show you how to insert here Micro SIM and Micro
0:09
SD card. So at the very beginning let me start by holding a power key, choose power off and wait until
0:16
your device will be completely switched off. Afterwards let's remove the back cover from the following device
0:23
So let's do it by using the cavity at the left down corner of the phone right here
0:28
And just simply use your nail finger to open the whole item. Let's do it step by step from the bottom of the device to the top and now you have access
0:37
to your slots. As you can see here you can insert two Micro SIM cards and one Micro SD
0:42
In my case let me just use one Micro SIM, this is my Micro SIM with the characteristic
0:48
edge right here and let's put this card in that position. Let's press it to the end
0:56
That's it. Now let's insert Micro SD, this is my Micro SD with the characteristic edge right here
1:03
and let's put this card in that position right here. Let's also press it to the end
1:10
Now let's close the back cover protection. Let me just switch on the device to check if both cards are working properly
1:20
Allview P80 Magic is switching on, let's wait a couple of seconds
1:34
Let's unlock the screen. Let's tap apps icon, let me find and select the settings, it's right here, let's tap settings
1:44
This is the information about our SIM card, let me tap no for now and under wireless and
1:49
networks let's choose SIM cards. As you can see our phone detects our SIM card so it's a good sign
1:55
Now let's go back, let's scroll down and under device tab let's choose storage and USB and
2:03
as you can see the device is reading our portable storage so our SD card
2:08
So everything went well, thank you for watching. Please subscribe our channel and leave thumbs up under the video
