0:00
Here I have LG Xcom and let me show you how to insert here the microSD and nanoSIM card
0:10
So at the very beginning let's start by pressing the power key right here, keep holding power
0:14
button, then let's choose power off and tap power off again just to confirm the whole operation
0:20
Afterwards you need to open the slot. The slot is located at the left edge of the device
0:26
Here you should use some thumb protector or special eject tool so here I have such a tool
0:31
Let me press it into this hole. Now let's remove the whole thing from your device
0:37
As simple as that. And here you can insert 2 cards, the nanoSIM and microSD
0:43
Let me start by using the microSD, here I have such a card with the characteristic edge
0:48
right here. Let's put this card in that position. Excellent. Now let's insert the nanoSIM
0:54
So here I have the nanoSIM with the characteristic edge right here
0:58
Let's put this card right here. Let me fix my SD card
1:04
And that's it. This is the properly prepared slot. This is the proper tray that you should use into your device
1:13
So let's put this tray right here and let's push it to the end
1:22
Now you have to press power key to switch on your LG and to make sure that both cards
1:27
works properly. Your LG is switching on, let's wait a couple of seconds
1:38
Let's unlock the screen right here. Let me find and select settings
1:44
Choose the Networks tab. As you can see here I have the information from my network so it means that my SIM card
1:55
is working properly. I can also see it right here because I have the signal from my network so it's a good sign
2:03
You can also choose General and here scroll down in order to find Storage and USB
2:07
As you can see the device is reading our SD card so basically everything went well
2:12
Both cards are working properly. Thank you for watching. If you like this video please subscribe our channel and leave thumbs up under the video
