0:00
Welcome, Anthony is a Poco F5 and today I will show you how you can insert SIM card into this device
0:12
Before we get started, you will need to grab a SIM ejector similar to this one
0:16
which comes provided with the device in the box. But if you can't find it
0:20
you could use a paper clip, string out one of the ends and it should work just as well
0:25
Once you have either one of those, you will probably want to take off the case if you have
0:30
one on your device. And then you will find the tray at the bottom of the device, right over here
0:38
So insert your pin, hopefully using some paper clip. You have one that isn't as thick
0:45
so it won't damage the tray like some Fruit Loop wanted to, I don't know, use here and damaged it
0:54
So anyway, I'm going to push it in and you will see that the tray comes out
1:00
enough for you to be able to grab it and pull it out. Now on the tray, you have space for two
1:05
different SIM cards, which you can obviously put on either side of them. So I'm going to be using
1:11
only one of these. Place the card on the tray with the chip side up, like so. Make sure that the card
1:20
is laying flush on the tray, as you can see this one is. Now it does, well, never mind
1:25
it doesn't hold the card here. Hopefully it holds it on the bottom side. This is the bottom side
1:36
Nope. Okay, so, okay, this is a little bit better. Typically, these cards will be held a little bit
1:43
more firmly in place. Maybe this card is just kind of like worn down and it falls out. So you
1:49
might need to be a little bit careful about inserting it. But from there, just simply slide it back in and the card should start working right away. So it's looking for service right now
2:00
And excuse me. Come on. There we go. And I just found it. It took it a little bit
2:17
a moment, but as you can see, it functions without any additional steps needed. So with
2:23
this being said, if you found this very helpful, don't forget to hit like, subscribe, and thanks
