0:00
Welcome. In front of me is a Motorola Moto E7 Power and today I'll show you how to insert
0:13
SIM and SD card into this device. Now for this process we will need a SIM ejector which
0:19
I just dropped. There we go, found it. Which you can find in the box. Now once you get
0:24
it from there you'll be able to pop out the tray now. Also you could use a paper clip
0:30
instead of this and it should work just as well but anyway let's get started. Pop out
0:35
the tray which is located on the upper left side. Once you push it in the tray should
0:39
pop out a little bit. From here you can just yank it out and you have space for either
0:44
two different SIM cards or one SIM card and one SD card. If you're planning to use two
0:49
different SIM cards you'd place one of those SIMs on the SD tray like this but if you're
0:55
planning to use one of each just move it over and then just drop SD on the other tray. From
1:05
here you can carefully insert it back into the device. There is nothing holding those
1:08
cards in place so they could just fall out if you don't do it carefully. So there we
1:14
go. Once you've inserted it into the device it will automatically tell you to put in a
1:19
pin for it. I mean at least in my case because my SIM card does have a pin. So I'll confirm
1:26
the pin right here. So based on the pin the SIM card is working, well based on this notification
1:33
right here as well. And let's look for the SD card which, oh there we go, SD card is
1:39
working as well. And that being said this is how you'd insert SIM and SD card into this
1:44
phone. So if you found this very helpful don't forget to hit like, subscribe and thanks for watching
