Up next in 10
How to Bypass Google Verification in SAMSUNG Galaxy S9 - Unlock FRP |HardReset.info
May 25, 2024
Tutorial and necessary tools: http://www.hardreset.info/devices/samsung/samsung-galaxy-s9/faq/bypass-google-verification/
In this tutorial you can check out how to bypass Google Verification in SAMSUNG Galaxy S9. This method was tested in Android 8.01 with the newest security patch. Now you can enjoy activating your SAMSUNG Galaxy S9 without Google Verification. In order to remove factory reset protection flash the device with the combination firmware.
How to bypass google verification in SAMSUNG Galaxy S9? How to skip Google Verification in SAMSUNG Galaxy S9? How to unlock FRP in SAMSUNG Galaxy S9? How to unlock Factory Reset Protection in SAMSUNG Galaxy S9? How to remove Factory Reset Protection in SAMSUNG Galaxy S9? How to activate your SAMSUNG Galaxy S9 without the Google verification?
More Info:
http://www.hardreset.info/devices/samsung/samsung-galaxy-s9/hardreset/first-method/
Show More Show Less View Video Transcript
0:00
Here I have Samsung Galaxy S9 and let me show you how to bypass Google verification on the
0:09
following phone, so let me show you how to unlock FRP protection on the following device
0:15
So at the very beginning let's start by using the following panel, so as you can see at
0:18
some point of initializing setup process the following screen may pops up and you need
0:25
to enter your Google's credentials to go next and activate your device
0:29
Let me show you how to bypass this step. So let's use the tutorial from hardware.info, here you need to download a couple of things
0:36
the USB drivers, the Samsung Odin software, it's important to choose the newest Samsung
0:42
Odin, so the version 3.13, you need to also install the Mini-ADB and fastboot, so let's
0:52
download this installer and let's install it, and afterwards it's good to also install
0:59
the FRP unlocker, it might be useful, and here you can download the Samsung firmware
1:04
with ADB communication, so you can use our uploads right here, and here let's choose
1:15
your folder, so it's SMG960F, or you may also use the following tutorial firmware change
1:24
update, this tutorial is right here, the link will be also under the video in the description
1:31
so here let's download the Sam firmware and the Odin software, the Odin software is also
1:39
needed for this operation, so then if you have the Sam firmware, let's open the Sam
1:45
firmware, and here you have to download your firmware with ADB communication, so let's
1:50
enter your model, the model for my device, for my Samsung Galaxy S9 is SM-G960F, and
2:00
the region, in my case it's XCO, but you can find your region by using our tab, here we
2:05
have the country carrier Samsung tab, as you can see here, you can choose your country
2:11
in my case it's Poland, and also the carrier, in my case it's without the carrier, so let
2:17
me use the following code, alright, so now when you have your model, when you have your
2:25
region, all you need to do is choose auto here, binary nature, check CRC32 and decrypt
2:31
automatically, now you can choose check update, the device looking for the firmware, and as
2:36
you can see you can download this firmware, let's just tap download and wait until the
2:40
download will be completed and until the Sam firmware will decrypt your software, so that's
2:47
it, as you can see in my case, I've got my firmware downloaded right here in the download
2:53
folder, this is my firmware, and then let's unpack this folder, this is the unpacked folder
2:59
with the firmware, and you also need to download the combination firmware, we prepared for
3:09
you the Samsung combination firmware, let's just use the following upload, here you have
3:14
to choose of course your folder, so it's SMG960F, Samsung Galaxy S9, and here we've got the
3:23
Samsung combination firmware for the U1 version, so how to check your version of combination
3:29
let's press power key, choose power off twice, let's wait until your device will be completely
3:34
switched off, simply enter the recovery mode, so let's press power key, Bixby key and volume
3:40
up, let's hold down together these three keys for a couple of seconds, release them as soon
3:47
as Samsung Galaxy S9 logo pops up in front of you, and this is the Android recovery mode
3:54
here you can read the information about your software, so in my case is G960FXXU1, so here
4:03
I have XXU1, this is U1 version, so I can download this combination, let's just use
4:08
right click, choose download, and select standard download, as you can see my combination is
4:13
also downloaded, and then let's unpack this combination, afterwards on your device let's
4:19
enter, let's scroll down by using volume down to choose power off, and press power
4:25
key to confirm it, alright when your device is switched off let's enter the download mode
4:34
by using power key, Bixby key and volume down, let's hold down together these three keys
4:40
power key, Bixby and volume down, release all keys as soon as warning pops up, press
4:44
volume up to continue, and this is download mode of your device, now let's open the Odin
4:52
so here I have Odin, let's open Odin right here, alright let me just make it here, let
5:00
me choose Odin, here I have Odin, now let's connect your device with your PC by using
5:07
of course USB-C cable, here I have such a cable, let me connect my phone, as you can
5:13
see on your Odin the device is added right here, you've got the added information and
5:19
the idcon is lighting on the blue so it's a good sign, let's flash your device with
5:23
the combination firmware, so let's choose AP, let's choose the download folder in my
5:28
case choose combination folder, let's use your combination file, let's wait a few seconds
5:58
alright the AP file is loaded so now let's also choose options right here, choose auto
6:10
reboot and factory reset time, now you can tap start right here, let's wait until the
6:35
flash will be completed, the progress bar is right here, you can also choose the log
7:05
alright, the flash is done, now you can disconnect your device from your PC, let me do it, the
7:22
Samsung Galaxy S9 is turning on, let's wait a couple of seconds, as you can see the factory
7:31
binary pops up so the combination screen will be available soon, that's it, now you can
7:40
use your combination firmware so let's choose here apps, find and select settings, from
7:49
the list of settings you need to scroll down and choose system, select about emulated device
7:57
let's tap a couple of times on build number and you are now a developer so you can go back to
8:03
a previous list, choose developer options, let's enable OEM unlocking right here, tap enable, let's
8:10
go back, choose here reset, tap factory data reset, read the information about the process and
8:16
choose reset phone, in order to accomplish this operation choose erase everything, the device is
8:23
performing the hard reset operation, let's wait a couple of seconds, alright the combination
8:45
firmware pops up again, let's press power key to switch off your device, the device is switching off, now on
8:52
your Odin let's just choose reset here and let's enter the download mode on your Samsung Galaxy S9
8:59
so let's press together power key, Bixby key and volume down, hold down together these three keys for a
9:05
couple of seconds, keep holding them, release all keys as soon as warning pops up and press volume up to
9:13
continue and to enter the download mode, now of course you need to connect your device with your PC by
9:19
using the USB-C cable, so here I have such a cable, let me connect my device, alright as you can see on
9:29
your Odin software the device is added so everything is just fine, now let's load here the files for your
9:41
firmware with ADB communication tab, BL, let's here choose my folder with my firmware, choose BL file, now
9:53
select AP file, this is the largest file so you have to wait a couple of seconds, maybe even up to 2 minutes
10:10
Alright now let's use the CP file, tab CP
10:41
here I have the folder with all necessary files, of course let's choose the CP file, now let's choose CSC here
10:50
so let's tab CSC, choose open, let me wait a few seconds
11:10
now let's choose options right here, make sure that you've got the auto reboot selected and factor reset time
11:18
you can unclick the repartition, it's not necessary and let's tab start right here
11:34
here you should see the progress bar, let's wait until the flash will be completed
12:48
as you can see the flash is completed, you may now disconnect your Samsung Galaxy S9 from your PC
12:54
let's just wait until the welcome panel pops up in front of you
13:18
Alright as you can see the welcome panel just pops up, let me now simply start
13:47
activate my device, let me try to activate my phone without the Google verification
13:54
so let me choose the language, here let's tab OK, let's go next, let me tab next to data network, let me tab next to Wi-Fi
14:04
let's tab agree to all terms and conditions, it's a good sign that we could bypass the Wi-Fi
14:12
let me choose next, tab next a couple of times, let me choose no thank you to protect my phone, skip anyway
14:19
choose more, more and agree and that's it, here let me just tab skip to the Samsung account
14:28
let me choose don't restore, finish and all done so as you can see you can bypass the FRP protection on your Samsung Galaxy S9 by doing the following steps
14:44
so everything went well, thank you for watching, please subscribe our channel and leave thumbs up under the video