0:00
Welcome and follow me as a Motorola Moto G52 and today I'll show you how we can apply a tempered glass
0:07
to this phone Now I'll be using just a Tempered glass for a different phone as you can probably see based on that label
0:18
But if you look at it, it's close enough and the way you apply
0:24
apply the tempered glass is Roughly gonna be the same for every phone no matter what glass you apply
0:32
So you can see that this one basically fits almost perfectly now
0:38
to get started with the tempered glass you should get There we go, one of these things a wet and dry wipe now
0:52
Truth be told I don't like to use these they're usually The wet wipes are dry and
1:00
They also smudge up now. This one is actually wet. But second part is they smudge up the display
1:07
and also the wet and the dry wipes are just like What is this tiny little wipe? What am I supposed to do with this
1:17
so I prefer to throw them out and just use a microfiber cloth, which
1:22
Works basically as well And doesn't need to be wet So to get started you will want to clean off the display make sure that there is no dirt on it
1:34
So clean off the majority like smudges grime dust then keep the microfiber cloth ready because
1:42
there is still a chance that some dust will settle on your display and if that happens it might create a
1:48
air bubble under the display Now Moving on to the display. I'll quickly
1:56
Go over how I apply tempered glass myself. So the way I do it is if it has a cutout like this one I would apply
2:04
I'll basically apply just a edge first. So place it at an angle. So it's lifted up and
2:11
Just make sure that it is that the camera is basically where it's supposed to be in the cutout, right and
2:18
And then I'll also make sure that Both top sides. So from left and right side are evenly spaced. So as an example, so it's not like at an angle like this
2:29
So just kind of try to make sure that it's evenly spaced and then while pinching the display from either side
2:36
I would apply a little bit of a force just to Just so it doesn't slide around and then place it down in place like so and this will ensure that it's basically
2:47
in a perfect position So that is how I apply glass now, obviously
2:53
This probably isn't the only way you can apply it and you might have a different way that works for you
2:58
That's completely fine. This is what works for me and what I'll be utilizing the method. So anyway
3:05
Now that it's clean Grab the tempered glass peel off protective layer
3:12
You Have a last gentle pass so there is no dust on the screen and apply it like I mentioned before
3:31
And it actually might be up I Need to push it a little bit higher as you can see it did stop on the bumper or on the case
3:42
And There we go So, there we go, it's already fully applied now I did this kind of motion just to press it down so it applies quicker
4:00
If you don't do it, it will just kind of slowly spread the spread and glue itself to the screen
4:06
But as you can see, there is no air bubbles whatsoever. The only thing you can see is just some smudges on the actual
4:12
Tempered glass so and clean that off And there we go So that is how you can apply a tempered glass for this phone. And if you found this video helpful
4:22
Don't forget to hit like subscribe and thanks for watching
