0:00
Here I have Allvue W1i and let me show you how to insert microSD and SIM card in this device
0:11
At first hold down the power key for a few seconds, then slide down your screen to switch
0:17
off your device and wait until your phone is completely shut down
0:22
Afterwards go to the back panel, find the cavity on the right down edge of your phone
0:27
and in that corner and simply use your nail finger to open the back panel
0:32
You have to use some strength, excellent, do it step by step
0:40
Well done. Now you have access to your slots. Let's insert here a microSIM card
0:50
Here I have one of the following cards. I've got two slots, I can use one of the following ones
0:57
At first I should unlock the slot, it's pretty easy, you've got a useful arrows right here
1:05
and we can open it. I'll show you one more time, this is a helpful arrow, let's unlock and now we can open this
1:15
Let's put it here a microSIM card, you have to do it in that way, this is the characteristic edge. Excellent
1:29
Make sure that the card suits your device and then close the slot and lock it. Excellent
1:39
Make sure that your slot is locked. Now we can put in that slot, the third one, the microSD card
1:50
Here is a microSD card with the characteristic edge right here and let's put it in that slot
2:01
in that direction, this is the only possible way and push it to the end of the slot
2:08
It's pretty easy. Let me show you one more time, this is how the card should look before putting it into
2:18
the slot and then put it here to the end. Excellent. Now let's put back the back panel and let me switch on my device to see if both cards
2:33
are working properly. The phone is switching on. Excellent
3:01
At first let's go to settings
