0:00
Here I have HomeTom HT3 and I'm going to show you how to insert a microSD and the SIM card
0:12
in the following phone. At the very beginning hold down the power key, when the following menu appears in front
0:19
of you choose power off and confirm the operation by tapping OK
0:24
Wait until your phone is completely switched off and afterwards use the cavity from the
0:29
down right edge of the phone in that corner and simply use your nail finger to open debug panel
0:41
It's very easy. Now you have access to your battery. You should remove it in order to have access to these three slots
0:53
So use the cavity from the down edge of the battery and simply remove the battery from
1:00
your phone. Now you can insert here two microSIM cards to your phone and one microSD card
1:14
Let me input the first card to the device. You should do it in that way
1:20
It's microSD card. Here you have the characteristic edge of the card and put it in that way
1:29
It's the only possible way. Make sure that the card goes to the end of the slot
1:37
And now you can install the microSD card. You have to do it in that direction, in that way
1:47
Let me show you. And simply put it right here in the third slot. OK
2:00
I leave one slot for microSIM card. Now I can insert the battery, put it back to our phone and insert debug panel and close it
2:22
Now let's make sure that our card works properly in the device
2:27
So switch on your device by holding the power key. Device is turned on. Excellent
2:59
As you can see at the top of the screen, the phone is connected to one of the mobile network
3:06
And let's make sure that the phone is reading a microSD card
3:15
So unlock the screen, tap apps icon, go to settings. Let me just change the language to the English. OK
3:32
And now from settings choose storage. And as you can see the phone is reading our microSD card
3:43
We can use it. Everything goes well. Thank you for watching. Please subscribe our channel and leave thumbs up under this video
