0:00
Here I have RIGO M5 Plus and let me show you how to insert microSD and microSIM card on
0:09
the following device. At the very beginning start holding power key for a few seconds, then swipe down your
0:15
screen to power off the device, wait a few seconds until your phone is completely shut
0:20
down and afterwards you have to remove the back cover. Let's do it by using the cavity at the right edge of the device and simply use your nail
0:29
finger to open the whole item. Let's do it step by step from the bottom of the device to the top
0:40
And now you have access to your battery. Let's remove the battery by using a down edge of the item
0:49
And now you can insert three cards. The two slots are for SIM cards and the last one is for memory card
0:57
So let's start with the memory card, in that case it's of course microSD card with the
1:01
characteristic stitches right here. This is the characteristic edge. And simply put this card in that position and let's push it to the end of the slot
1:14
Make sure that your card suits to your device. And now you can insert microSIM card with the characteristic edge right here
1:23
And simply put this card in that position. In the first slot. Excellent
1:33
I leave the middle slot empty but you can insert here the second SIM card
1:39
Now let's put back the battery and close the back cover
1:55
Let's switch on your device by holding the power key. Excellent
2:11
Let's check if our card works properly. Unlock the screen. Find and select settings
2:21
Scroll down. Choose storage. And as you can see our card detects SD card so our memory card is working properly
2:36
You can also see at the top of the screen that our device is using a SIM card
2:43
So everything went well. Thank you for watching. Please subscribe our channel and leave thumbs up under the video
