0:00
Here I have Bion SP50, let me show you how to insert SIM and SD card into this device
0:12
At the very beginning hold down the power key for a few seconds, then from the following
0:16
options let's choose power off and wait until your phone is completely switched off
0:21
Afterwards you have to remove the back cover. The best way to do it is by using the cavity at the right corner of your phone and simply
0:28
use your nail finger to open the whole item. Let's do it step by step from the bottom of your device to the top and now you have access
0:36
to your battery. Let's remove your battery by using the cavity at the down edge of the item and simply remove
0:43
it from the phone. Now you can insert here memory card, here I have one of the following cards with the
0:52
characteristic edge right here, this is of course micro SD card and let's put this card
0:57
in that slot. Let's place this card here and push it to the end
1:06
Well done, make sure it suits to your device. Now you can insert here a regular SIM card, here I have one of the following card with
1:13
the characteristic edge right here and simply put this card into this first slot
1:22
Let's push it to the end, excellent. I leave one slot empty, here you can insert also micro SIM card
1:30
Now let's put back the battery, let's do it properly with the characteristic edge right here
1:40
Then let's insert the back cover protection and now you can switch on your device by holding
1:45
the power key. The device is turning on
2:00
Excellent now let me check if both cards are working properly. As you can see at the top of the screen the device is connected to one of the SIM cards
2:08
so our SIM card was installed properly. Now let's go to settings, scroll down and choose storage
2:21
As you may observe the device is reading our memory card, so our micro SD card was installed properly
2:28
Thank you for watching, please subscribe our channel and leave thumbs up under the video
