0:00
Here I have Ligo Shark 1 and I'm going to show you how to insert SIM card and microSD
0:11
card in this device. At the very beginning hold down the power key to switch off your phone, then swipe down
0:19
the screen to power off the device and wait until your phone is completely shut down
0:24
Afterwards you have to find on the left side of your phone slot to microSIM and microSD card
0:34
Then you have to open this slot by using some tiny tool
0:39
It could be special eject tool or for example thumber tack and simply press this tiny tool
0:46
into this little hole. Let me show you. Just press. And now the slots are open
0:56
You can remove it from the phone and start installing both cards
1:03
The following device you can install two microSIM cards or one microSIM and one microSD card
1:12
On this video let's insert one microSIM card in the first slot
1:18
You have to do it in that way, with the characteristic edge right here
1:23
And into the second slot let's input a microSD card with the characteristic edge right here
1:29
Put it that way, in that direction. And microSIM card. Let me show you one more time. Excellent
1:42
Let's keep both cards like that. And now let's go back to your device and input the whole slot to your phone
1:56
Do it slowly. Make sure that both cards are properly installed
2:07
And close the slot of your device. Now let's start the phone by holding the power key
2:19
The device is turning on. Excellent. Let's unlock the screen
2:31
Go to settings. Tap general settings. Scroll down. And here you have storage
2:42
And as you may observe you can use SD card so the phone is reading our microSD card
2:49
And also if you look at the top of the screen the phone is connected to one of the mobile
2:54
network so both cards are working properly. Everything went well. Thank you for watching
3:00
Please subscribe our channel and leave thumbs up under the video
