0:00
Here I have Gigaset GS160 and let me show you how to enter the factory mode on the following device
0:12
So at the very beginning let's start by pressing the power key. Let me press power off and double click to confirm it
0:18
Let's wait until your device will be completely shut down. And afterwards let's use the following combination of keys
0:26
The power key and volume down, so let's hold down together these two keys for a couple
0:30
of seconds, power key and volume down. Keep holding both keys. And release all keys as soon as Gigaset logo pops up on the screen
0:43
And the factory mode just pops up in front of you. Here you can navigate by using volume down and confirm options by pressing power key
0:50
You can perform here the auto test. The device will test everything
0:55
You can perform the manual test, so by yourself you will have to test everything
1:01
You can choose the item test, let me press it. Here you can choose your test, so you can choose what you are interested in, for example
1:09
the keys. So let's choose volume down, up and power. You can for example test the blacklight level
1:22
Choose pass or fail. If you would like to quit the item test let's use volume up as the back key
1:29
You can see the test report. You can choose the debug test, let me choose it
1:34
Here you can choose the receiving debug. Let's use volume up to go back
1:39
You can perform the hard reset operation, so the clear eMMC, but let's just be careful
1:43
with that one because you will lose all your data. You can choose the version, so you can press volume up and check the version of the device
1:51
Let's use volume up to go back. If you would like to quit this mode let's highlight the last option which is reboot
1:57
and press power key to reboot your device into a normal mode
2:01
Right now the device is restarting and rebooting
2:12
And that's it, now your device is in normal mode. So thank you for watching, please subscribe our channel and leave thumbs up under the video
