0:00
Here I have Alcatel Pixi first and let me show you how to insert microSD and microSIM
0:10
card in the following phone. At the very beginning hold down the power key for a few seconds
0:15
When the phone's options appears in front of you choose power off and confirm the whole
0:19
operation by tapping OK. Wait until your device is completely switched off and afterwards you have to remove the
0:26
back cover by using the cavity at the down right edge and corner of your phone
0:32
Simply use your nail finger to open the whole item. You have to do it carefully step by step from the bottom of your device to the top. Excellent
0:42
Now you have access to your slots but first you have to remove the battery by using the
0:47
cavity at the down edge of your battery. Simply remove it from the device and now you can insert here 3 cards
0:57
The two slots are for SIM cards and the one is for memory card so in that case is microSD card
1:04
Here I have one of the following card with the characteristic edge right here and simply
1:09
put this card in that way. Make sure it's pushed to the end and now let's insert microSIM card with the characteristic
1:23
edge right here. Let me put it in that middle slot. It's the first slot for SIM cards and simply put it that way. Excellent
1:39
Now you can insert the battery, put back the back cover and now let's switch on our device
1:52
by holding the power key and let's make sure that both cards are working properly. Excellent
2:06
Let's unload the screen, tap apps icon, find and select settings, scroll down, select storage
2:28
and as you can see the device is reading our SD card so our memory card is working properly
2:35
and also you can observe at the top of the screen that the device is connected to one
2:39
of the mobile network so it means that our SIM card is working properly
2:45
So everything went well. Thank you for watching, please subscribe our channel and leave thumbs up under the video
