Black Diamond Storm 450 - How To Make SOS Signal

Visit Our Website For More Info : https://www.hardreset.info To make an SOS signal with the Black Diamond Storm 450 headlamp, follow these steps: Turn on the Black Diamond Storm 450 headlamp by pressing and holding the power button for a few seconds. Once the headlamp is on, press the power button briefly to cycle through the different lighting modes, until you reach the strobe mode. The headlamp has different modes, such as the red night vision mode, the strobe mode, and the default mode, which provides white light with a wide beam pattern. To make an SOS signal with the headlamp, press the power button briefly. The headlamp will enter the strobe mode, and it will blink the SOS signal, which consists of three short flashes, followed by three long flashes, followed by three short flashes. The SOS signal is a universal distress signal, which can be used to signal your location in case of emergency. To exit the strobe mode, press and hold the power button for a few seconds, until the headlamp turns off. Keep in mind that the Black Diamond Storm 450 headlamp has a strobe mode, which allows you to signal your location in case of emergency. You can make an SOS signal with the headlamp by pressing the power button briefly, and the headlamp will enter the strobe mode, and it will blink the SOS signal, which consists of three short flashes, followed by three long flashes, followed by three short flashes. You should consider the battery life implications of using the strobe mode on the Black Diamond Storm 450 headlamp, and recharge or replace the batteries as needed. How to make SOS signal on Black Diamond Storm 450 ? Black Diamond Storm 450 Sos Signal ? How to make SOS signal on Black Diamond Storm 450 ? How to use SOS on Black Diamond Storm 450 ? #BlackDiamondStorm450 # # Follow us on Instagram ► https://www.instagram.com/hardreset.info