0:00
Let me show you how to insert microSD card and SIM card in Link City
0:10
At the very beginning hold down the power key to turn off your device, tap power off
0:15
and confirm the operation by tapping OK. Wait until your device is completely shut down and afterwards find the cavity from the
0:24
down right edge of your phone in that corner and simply use your nail finger to open the
0:30
back panel. Do it step by step from the bottom of your device to the top
0:36
Now you have access to your battery and also to the slots of cards
0:42
Let's open the battery by using this cavity. Excellent. Now let's insert at first the microSD card
0:55
This is the following card. This is the characteristic edge and simply put it in that direction, in that way, in
1:04
the first slot. Let me show you. Let me show you one more time
1:15
This is the card and put it right here. This is the slot for microSD
1:26
There are useful pictures that could be helpful. Now let's install the SIM card
1:34
Here I have SIM card and as we can see we should insert a SIM card in that way with
1:41
the characteristic edge right here and put it right here
1:54
Push it to the end of the slot and here we leave one open space for microSIM card that
2:01
we can use in the future. So now let's install the battery
2:08
Put it right there with the golden stitches right here. Make sure that everything suits
2:17
Now let's insert the back panel. Excellent. Let's hold power key for a few seconds and let me check if both cards are working properly
2:35
The phone is switching on. Excellent. Let's unlock the screen and as you can see the SIM card is detected and the phone is
2:49
connected to one of the mobile network so a SIM card was installed properly
2:55
Tap close and let's go to settings and make sure that SD card is working
3:03
On list of settings choose storage and as you can see the phone is reading our SD card
3:13
we can use it. Everything went well. Thank you for watching. Please subscribe our channel and leave thumbs up under this video
