0:00
Here I have the Lark Evolution X2 and let me show you how to insert here SD and SIM card
0:12
So first of all let's start by holding a power key, choose power off and tap OK to confirm it
0:18
Wait until your device will be completely switched off and afterwards let's go to your
0:22
back panel, let's remove the protection from the top of the screen right here
0:27
So let me do it, let's use your nail finger to open the whole thing from your device and
0:34
here you can insert SIM and microSD card. So at first let me use a SIM card, here I have my card with the characteristic edge
0:44
right here and let's put this card in that position. Here you can insert two slots, two SIM cards but in my case let me just insert one
0:55
Then let's insert the memory card with the characteristic edge right here
0:59
Let's put this card in that position and let me press it to the end, you should hear the
1:03
characteristic sound. Then let's close debug cover protection and let me simply switch on the device by holding
1:11
a power key. Like Evolution X2 is switching on, wait a couple of seconds
1:27
Let's unlock the screen right here, tap apps icon, let me find and select the settings
1:40
choose SIM management and as you can see the device is reading our SIM card
1:47
You can go back and under device let's choose storage and you may see that the device is
1:54
also reading our SD card. So everything went well, you can go back and start using your device
1:59
Thank you for watching, please subscribe our channel and leave a thumbs up under the video