0:00
Welcome guys, in this video I'm going to show you how can apply tempered glass
0:03
for your Xiaomi 12 Lite. Okay, so first of all I can recommend you to put on this silicone case to do not
0:13
scratch your back or camera lenses when you're gonna put it on the flat surface
0:18
And right now we have to open the box with the glass. In this case I'm using
0:24
the glass from the Galaxy M30s but it still fits the screen so that's what
0:31
matter. We have to open the box, we have to get the swipes. Let me just zoom in to
0:39
show you better how it looks. Okay, so there it is and what we have to do, we
0:45
have to get the good lighting condition to see a very mess that we have on the
0:49
screen. As you can see in my case a lot of fingerprints, some kind of dust and
0:54
also other gritty marks. As you can see we can find already installed protection
0:59
that's very thin foil. You can leave that foil or remove it and apply the
1:06
tempered glass. You can decide. I'm gonna improve protection of the screen so I'm
1:10
gonna leave this foil and on this foil I'm gonna install this tempered glass
1:16
So first of all we have to start from the wet wipe
1:30
And as you can see we have to simply reach a very edge and the corner that we
1:35
have on the phone on the display to smoothly get rid of this greasy marks
1:42
from our display. So make few moves and after that smoothly move for the dry
1:49
wipe and we have to remove wet mark cleaning
2:12
Okay, so right now I can recommend you to take a look on the display and be
2:18
sure that there's no any pieces of the dust. In my case everything is fine
2:23
So what we have to do right now just grab the tempered glass and you have to
2:29
start from removing this sticker. So hold the glass like that in this position
2:37
grab the sticker and try to try to gently peel it off just like that
2:50
Okay, hold tempered glass with your four fingers for each corner and we can start
2:59
the positioning of the glass from the upper section of the screen. So you have
3:04
to keep holding the bottom part with your two fingers and try to put it correctly right here. We can put it a little bit higher I think like that
3:19
As you can see everything is fine so we have to hold in this place in the
3:23
middle and then put it. And what we have to do just simply press on the glass
3:34
as you can see it is sticking to our display and if you have this glue marks
3:45
how to remove it that's very simple just press on it and as you can see it
3:53
will disappear. So that's what I'm gonna do right now for the whole screen
4:04
Okay and as you can see that's all right now we can simply open this phone try to
4:25
use it everything is fine there is no problem with the touch interaction it
4:30
works smooth and all is good. And that's how we can apply glass for your Xiaomi
4:37
12T Lite. If you find this video helpful remember to leave a like, comment and subscribe
