0:00
Welcome, Enzalami is a Meizu M6T and today I will show you how to enable and set up the
0:12
portable hotspot. Now to get started, you want to pull down the notification panel and find the hotspot
0:17
toggle, which for me is right over here. Once you find it, hold the toggle and this will take us to the settings where you can
0:22
actually customize it. So from here, portable hotspot, you want to navigate to, let's see, LAN Tethering Configuration
0:32
and start off by changing the password. If you tap right over here, you'll see that, we'll see that password that is set by default
0:39
Now for you it will be obviously different. This is just some randomly generated password, so we can simply remove this one because it
0:46
sucks, let's be honest. So let's remove this one and set it around
0:50
Now it does need to have eight characters in length, as you can see, and I select something
0:56
really complicated. There we go. Which point you will be able to save
1:02
Now you also have the option to change the AP band from 2.4 to 5 gigahertz
1:08
Now this option is dependent if your device that you will be connecting to the hotspot
1:13
with supports 5 gigahertz. You can check it out, turn it on
1:17
If you just simply don't see the hotspot, then go back, drop it to 2.4 and then you
1:22
should see it, no problem. It will just mean that your device doesn't support it
1:27
And security, keep it as it is, along with hygiene network, I wouldn't also select that
1:32
So from there, let's just simply tap on OK. And we can now tap on that toggle right here to turn it on at any time
1:40
And there we go, portable hotspot is active. So right now it's enabled and you can connect to your hotspot
1:46
And once you're done with it, make sure you turn it off because as you've seen, it does turn off Wi-Fi
1:50
That is because it is using the Wi-Fi card to basically broadcast the signal
1:56
So when you're using hotspot, you won't have Wi-Fi. You will be only forced to use your mobile network
2:01
So once you're done with it, check it off and you will see that your Wi-Fi turns on
2:05
automatically back on. So that being said, this is how you would enable it and set it up
2:11
And if you found this video helpful, don't forget to hit like, subscribe, and thanks
