0:00
Welcome! In front of me I have Suunto Mbit3 Peak and I'm gonna show you how to
0:12
power off this device. Turning off this device is quite tricky because we need
0:17
to open the service menu. To do it we need to present hold the start slash
0:22
stop button and back slash lab button together. We need to present hold those
0:26
two buttons. Keep holding them until this bar fills in to the end
0:32
Basically reaches the second end at the top. Keep holding them like this and then
0:39
you can release the buttons and you should enter the service menu. Here use
0:44
the start slash stop button and light slash lock button to move up and down
0:47
like that. Select the option called action and press next button to enter of
0:55
course. Now scroll down select power off option and press next. Then press the
1:02
start slash stop button to confirm and turn off your watch. As you can see the
1:09
watch turned off and now to turn it on we need to basically plug it into the
1:14
power source or the computer. I'm gonna plug in mine to computer so I'm gonna
1:18
grab this charging cable that comes with your watch. This and I'm gonna take
1:28
this end with the clip clip it into our watch or rather clip our watch into this
1:34
clamp. To do it basically you need to align the pins on the watch with the
1:41
pins on the clip. Put them like this and once you align the pins just release the
1:50
clip so it holds on like that. Now we can place our watch right here. Take the
2:04
second end of the USB cable and plug it in into a computer. My cable is too short
2:10
to reach my computer so I'm just gonna use this handy USB extension cord. It's
2:17
plugged in into my computer so I'm gonna plug in the cable into the extension
2:23
like this and the watch should turn on after you plug it into power source. Wait
2:30
couple of seconds and once you see the watch face you can unplug the watch like
2:35
that and after you turn off and on your watch we need to set a few settings
2:43
because they get reset like language and profile settings. So now to select the
2:49
language you can use up and down buttons like this to scroll through the list of
2:53
languages. Select the language you like to use and press next. You're gonna be
3:02
asked if you want to pair the watch with the mobile app. I'm gonna tap rather
3:06
press the light slash lock button. To skip this step but you can press yes and
3:11
pair your watch with your phone. And now we can or rather we need to set up a few
3:17
things. First units. Let's press next button. You can select the units. I'm
3:23
gonna select metric and press next. Now we need to set time. Press next. Basically
3:29
time format. Select the one you like and press next. Here we have actual time, hour
3:35
We can set it by pressing up and down to set the hour. Then press next to jump to
3:40
minutes. Again set the minutes and press next. Next is date. First we need to set
3:46
the year by pressing up and down. Then next month. Then next day. Next. And last
3:58
we have personal data. Let's press next. And here we can select gender. Female or
4:04
male. Press next. Date of birth. Select the year. Then wait. And after wait you
4:17
should see the watch face. And that's how you power off and power on this device
4:24
Thank you for watching. If you found this video helpful please consider
4:29
subscribing to our Channel and leaving a like on the video
