0:00
Welcome. Infanami is a Redmi A1 and today I will show you how we can apply a temper glass to this phone
0:12
Now I do have a temper glass for a completely different phone, professional work, but it fits basically perfectly on here so it doesn't really matter
0:22
And I'm pretty sure if you're watching this, you're watching this more for the way to apply it rather than what it is applying being applied to
0:30
So, anyway, inside you'll most likely have a tempered glass. If you don't, I did something wrong
0:36
And there might be two different options. Oh, this one is chipped, actually
0:45
All I want to do. Luckily, I got more. So there we go
0:54
This one isn't. So, for the most part I think nowadays, most of the tempered glass
0:59
have just like a single protective layer so as you can see one and you just
1:05
pull that off and it reveals the sticky side on the glass but there used to be at least at one point ones that had both layers protected or both sides So for instance the one would be the sticky side And then on the other side you would have two
1:23
which would just reveal the glass that you would be actually touching once you apply it. In this case, it's not protected at all
1:28
so you're already touching the glass that you'll be using later on
1:33
So that's one. And then get some crappy foam. And one of these things
1:41
a wet and dry wipe though in certain cases for some of you
1:45
that wet pipe might be still dry so you have two dry wipes now
1:49
and in general this is completely freaking useless so I recommend throwing it away and using something
1:55
like a microfiber cloth if you have it now if you don't you could use those wipes
2:01
though keep in mind the wet wipe the solution that at least they use in this case
2:05
for like this specific brand is kind of garbage and it creates smudges
2:10
and it's a pain to work with. So I'll be using a microfiber cloud for this
2:18
Now, before I start cleaning the display, I'm going to quickly go into how I apply the glass
2:25
once the display has been cleaned and prepared for this So number one once you ready you peel off the number one This will reveal a sticky side on the temper glass
2:38
So what I'm holding right here is the side that I would be throwing out
2:43
And this would leave me with just a glass that will just then place like this
2:48
So now, once you peel it off and you're ready to place
2:53
I hold a glass kind of like this where I pinch it, as you can see. and this allows me to just lower it down to the display
3:00
and then without having it stick to the display because it's hovering
3:04
i'm using my like fingers to kind of rest it on the bezels
3:10
i align it correctly with the camera and the top left and right bezel
3:17
and i'll then lower it a little bit at an angle so it is kind of like this at this point
3:24
so it starts sticking so it won't like slide around And then with that in mind, I'm just going to lower it down here
3:31
Again, feel the bezels just so I can feel the middle point of it
3:36
So it's not too much to the right or left. You get what I mean, hopefully. And then just drop it
3:42
And it should stick perfectly So there we go Now to clean off the display and just do it you want to get any kind of dust particles of your display they might create air
4:01
bubbles once you drop your tempered glass so you really want to be careful about them
4:06
make sure that there is almost none and once the display is ready peel it
4:13
off and apply it. Come on you stick. There we go. As you can see it sticking? You can speed it up
4:43
And there we go. Nicely applied. So, if you found this very helpful, don't forget to hit like, subscribe, and thanks for watching
