0:00
Welcome, Enfenom is an LG K61 and today I will show you how to go through the setup
0:11
process of the device. And when you boot it up for the first time, you'll be presented with a welcome screen
0:16
where you get to choose the language on the device. By tapping right over here, there we go, and from here select your language
0:24
I'm going to stick with English, which is set by default and then go back
0:29
Once you tap on a language, it will simply go back here
0:32
And then let's tap on the arrow, choose our screen, how it looks like
0:37
So I have the option of the cutout for the camera or without it, so it just covers it
0:41
in black like this. I personally rather see the hole-punched camera than just like this disgusting black bar
0:51
And tap on next, insert SIM card. This step is completely optional
0:54
You get to choose if you, well, not choose, you can just insert a SIM card and that's
1:01
about it. You can do that later on without any problem as well
1:04
Then we have internet. You can skip this step or connect to some kind of Wi-Fi
1:12
If you don't have one, well then skip it. If you do, select it from right here after you enable it
1:19
And the only benefit of connecting right now to your network is the ability later on throughout
1:24
the setup process to log into your Google account and also restore the device from a backup
1:32
Apart from that, you can skip it if you don't plan to do either of those
1:44
Then we have date and time settings. So you can change or set your date and time
1:50
And for instance we can set the time zone which will also correct my time right now
1:56
And everything else is correct. So let's tap on next. You have Google services, allow location, scanning and send user and diagnostic data
2:06
Now you can read each one of them carefully and see if that's something that you want
2:13
or don't want. If you don't want it, simply select it off like so
2:18
And then at the bottom tap on accept. And you have secure your phone
2:23
So on the screen you will be able to add a fingerprint along with a pin pattern or password
2:28
As you can see, by default it's set to set up fingerprint
2:32
Below that you have only a pin pattern password. Or the last one is just to skip this step
2:39
Now I'm going to go over only one. So I'm going to set a pattern as an example
2:47
Even though it's set to fingerprint I can just skip that later on
2:52
So right here choose whichever one you want. As I said I'm going to choose pattern
2:58
And the next thing is it's asking you if you want to require the pattern when the device
3:03
is booting up. So that is right before it boots fully up into Android it will show you, in my case
3:10
it's going to be the pattern screen where I need to confirm it
3:14
And then once you do the phone fully boots up and you will be able then to see the lock
3:18
screen where you get to put in the pattern once more. So I'd rather not have that
3:23
It's just kind of pointless one extra time you need to put in a pattern
3:28
I don't really want to do that. So I'm going to say no thanks
3:32
And then we can now set up the pattern. So when I draw the pattern twice it needs to be the same
3:40
And from there confirm it. And that will set the pattern. And now we can start scanning our finger on the back
3:49
Or like I said I'm just going to skip this right here and only keep the pattern itself
3:56
Then legal documents. Select your region. So mine is at the top
4:01
And from here again more legal documents. So you can select to agree to all of them
4:10
Now some of them are optional I believe. Like there we go
4:14
So this one is optional. And you can deselect this one. In terms of personal data I can deselect this one
4:22
And now these two are required as you can see. From there tap on done
4:29
And you should be finished with the setup. So if you found this very helpful don't forget to hit like, subscribe and thanks for watching