0:01
So, today I'll do unboxing along with a quick look test of the Leier MagFix Pro
0:08
So this is a two-in-one MagSafe charger for, well, technically Apple product
0:14
but obviously it will work with other devices as well. It's just a Qi charger
0:18
So, yeah. Your, what are they called? AirPods. AirPods along with your iPhone or any other phone in general
0:31
So, I just get in there. We do have a seal to cut through
0:40
There we go. So, right here we have a Type-C to Type-C cable
0:50
It looks like it's actually a decent length of it as well. Then we get an instruction, so..
0:56
I'll leave those both to the side. There we go. Get that out and then this
1:06
Okay. Now, the MagSafe pad right here looks like it has a very limited amount of adjustability
1:16
as you can see. So, this is kind of staying... So, this is the max it can go flat
1:23
and this is the max it can go to... to the side. So, I'll leave this one to the side
1:28
And this is the max it can go to. Kind of like a fixed position, so it's standing straight
1:34
Now, when it's placed, it's almost fully straight. You can kind of see that
1:41
So... For desk accessory, if you're going to place your phone like this
1:48
I would need to have it further out to actually be able to use or see the device comfortably like this
1:53
So, I'd probably be twisting it to the maximum position of how it can go as far as it can lean back
2:01
Which, again, is not much of an adjustable position. As you can twist it around
2:08
Now, one thing to add here, this is a fabric material right here with almost no rubber
2:14
And for a case like this, it makes it a little bit easier to twist it around
2:21
if that is something that you wanted to do. Maybe you want to use your phone in a landscape mode
2:25
which is completely fine, you are free to do so. Now, the reason I'm pointing this out is because, for instance
2:32
this one, which is almost identical from Ugreen, has way more adjustability
2:38
As you can see, you can basically lay the phone flat. And in addition, for the charging of your AirPods
2:46
it has a specific cutout that the AirPods would just drop into
2:52
So, I wanted to point that out. And also, when you plop your phone on here, it holds it and makes it a little bit harder to twist it around
2:59
Which also would mean that it might be a bit better in terms of holding a position
3:03
Now, not to say that this one will switch. As you can see, I'll be pressing on it
3:09
and it's not like it's gonna shift easily. So, don't worry about that
3:15
What you probably should worry about, though, is the plastic design. It feels a bit flimsy
3:23
So, for some reason, like you can... Just me pressing, pulling this down, you can see it literally bend right here
3:31
And I'm not putting much of a pressure on here. So... You can see it kind of just bend
3:42
I don't think it's gonna easily break, but it does make me a little bit concerned
3:47
Now, having said that, the plug for the charging port is on the side
3:52
and it does have more weight to it, a bit more also vibration to it
3:56
There's like some loose components, or looser than I would probably like
4:00
As for instance, this one has nothing that is vibrating. So, there we go
4:05
Now, objectively speaking, in terms of the design aesthetics, I kind of like the mesh finish of it
4:10
It makes it look a bit more premium. But in terms of quality, I feel like it's leaving a little bit to be desired
4:19
especially when I compare it to almost the exact same kind of charger
4:24
like this one from Ugreen. So, this one feels much more robust
4:28
even though it just has a tiny little metal spoke right here that is holding it up
4:33
So, yeah, just wanted to point that out. Anyway, if you found this video helpful
4:37
don't forget to hit like, subscribe, and thanks for watching. Bye
