0:00
Here I have Lenovo Fab 2 Pro and let me show you how to use secret codes on the following device
0:12
So at the very beginning let's start by using the home screen. Here let's open the fonts dialer and let's activate the keypad
0:19
So now it's time to use the first secret code. Let's enter this code. Asterix Hound, Asterix Pound, Four Six, Three Six, Pound Asterix, Pound Asterix
0:30
That's it. The testing information pops up on the screen. So let's enter the first section which is phone information
0:37
Here you can read such things as phone number, IMEI number, the roaming, cell status and
0:44
other stuff. Here you can also run a ping test or turn off the radio
0:48
You may also use more key in order to select radio band or get PDP list
0:53
Let's go back and let's open the usage statistics. Here you've got the list of all apps when you can read the last time used or usage time
1:02
Use back key again. Let's open the Wi-Fi information. And here you can use the Wi-Fi API where you can disable network, disconnect network, enable
1:11
network or get configured networks. Use back key again to open the Wi-Fi config and if you have some configured networks here
1:18
you should find the full specification. Use back key one more time to open the Wi-Fi status and here you can refresh all stats
1:26
or run a ping test. Alright let's go back a few times and it's time to open right now the IMEI mode
1:36
So let's use Asterix, Pound, Zero Six, Pound and IMEI information pops up
1:43
Now let me open the external version. So let's use hash, hash, hash, hash, zero, zero, zero, zero, hash
1:53
And version information pops up. Here you can read the product version, software information or framework version
1:59
Tab OK. Let's use the engineer mode. So let's enter Pound, Pound, Pound, Pound, one, one, one, one, Pound
2:12
And the engineer mode pops up. Here you can perform the auto test to test all features
2:16
You can use the Tango test, manual test and see the test results
2:20
If you tap manual test for example you can choose one of the tests, for example speaker test
2:32
Alright if everything is alright tap pass. And you can also use other stuff for example Bluetooth, GPS, sensors, microphone, LCD test
2:44
as you can see right here. Alright let's go back and now it's time to open the serial number
2:51
So let's use Pound, Pound, Pound, Pound, two, two, two, two, Pound and serial number pops
2:59
up in front of you. Tap OK. It's time to open the Lenovo logger
3:03
So let's use Pound, Pound, Pound, Pound, three, three, three, three, Pound and Lenovo logger
3:10
pops up. That's it. Alright here you can use the following menu
3:15
You can use more key to see a help. Let's go back
3:19
You can also perform the factory reset by using secret code. Let me show you how to do it
3:23
You have to use Pound, Pound, Pound, Pound, seven, seven, seven, seven, Pound
3:30
That's it. You will restore all settings and you will erase all personal data
3:35
So let's be aware of that. Alright let me tap No in my case
3:39
So that's it. Everything went well. Thank you for watching. Please subscribe our channel, leave thumbs up under the video