0:00
Welcome, in front of me is a Samsung Galaxy A53 and today I'll show you how I can apply
0:13
a tempered glass to this phone. So you can obviously see that I do have my tempered glass right over here ready to go
0:21
So here we go. Now inside with your tempered glass you should also get, actually take it out, there we go
0:30
you should also get one of these things, a dry and a wet wipe
0:34
If you want you can use them, if you don't have anything better then go right ahead
0:39
And if you do have something like a microfiber cloth like I do, that's probably going to
0:44
be a little bit better than using those tiny little wipes. That's just a personal preference of mine which works better for me over these tiny
0:54
little wipes because just to put that in perspective they are absolutely tiny
1:03
And also doesn't help that sometimes they're not even wet. This one is which you can see
1:09
But yeah, sometimes you will unpack them and they're just going to be dry which doesn't
1:14
really help. So anyway, let's first clean off our display as well as you can
1:24
You want to make sure that there's nothing on the display, at least like no smudges
1:30
With dust I wouldn't really worry about it too much right now, we're going to do that
1:34
later on. There we go. Right now it's really crystal clear, nothing really on it so yeah, I'm just going to set
1:41
it up and get my screen protector ready. Now the way I apply my screen protector which works for me is I will just kind of pinch
1:50
it like so and then while pinching it I also try to find the middle point by basically
1:58
pinching out bezels on top of it which just allows me to place the glass right in the
2:03
middle of the display. And from there, while keeping it at an angle, so basically what I do is have it like this
2:11
so it doesn't start sticking, when I peel it off I will then try to align it correctly
2:17
right here so it's evenly spaced with the bezel and then just simply drop it
2:22
And it should just drop perfectly in the middle. Now you don't have to drop it like I do, you can just kind of slowly place it down to make
2:29
sure that it is going right in the middle like so and from there it's going to start
2:35
sticking on its own. So anyway, let's just make sure that there's nothing on the screen, because I did touch
2:43
it a little bit. There we go. There we go. So let's peel off our layer, which for me I only have one
2:52
If you have two, you will first peel off the sticky one and then the non-sticky one
2:59
So before you actually apply it, I do recommend just giving it a couple more passes just so
3:03
there is no dust on the screen. There we go
3:13
And like I mentioned, I'm just going to now carefully apply it to the middle and the edge
3:20
I'm going to push my fingers a little bit down, just so it won't move too much
3:29
And there we go. Now you can see at an angle it is right now just kind of gluing itself to the screen
3:38
And there we go. It's created a massive air bubble, but we can quickly get rid of this by simply pushing
3:43
it out of the way. And you can see it's completely gone now. So there we go
3:47
As you can see, the screen protector is just perfectly applied, evenly spaced, or almost evenly
3:56
It's a little bit to the left, but I would say it's still good enough
4:01
If you're really like super picky about it, you could try to lift it up and align it correctly
4:07
but to me it's close enough to where it's supposed to be, so I'm just going to keep it like it is
4:11
Anyway, that is how you could apply your screen protector to your phone, and if you found
4:15
this video helpful, don't forget to hit like, subscribe, and thanks for watching
