0:00
Here I have Dogeomtom HT7 and I'm going to show you how to insert microSD card and SIM
0:10
card in the following device. At the very beginning hold down the power key for a few seconds, tap power off and confirm
0:17
the operation by tapping OK. Wait until your device is completely switched off and afterwards open the back panel of
0:24
the phone. You should do it by using the cavity from the down edge of the phone and simply pushing backwards
0:38
Open this panel step by step from the bottom to the top
0:48
Well done. Now you have access to your battery
0:58
Let's remove it by using this cavity from the down edge of the battery's phone
1:06
Now you have access to three slots of your device. The first two are for the SIM card
1:13
Let's insert your SIM card to the first one. It's important to do it in the right direction
1:19
This is the characteristic edge of your card. Put it that way, it's the only possible way
1:28
And now insert the microSD card. You have to do it exactly right to that and put it right here in the third slot
1:53
Make sure that all cards suit to the slots and now you can put back the battery
2:02
Do it in that direction. Insert the back panel and close it
2:15
Now you can use power key to switch on your device. Let's see if our card works properly on our device. Excellent
2:33
As you can see the SIM card was found. So the SIM card was installed properly
2:41
You can also observe at the top of the screen that the phone is connected to one of the
2:48
mobile network so everything goes perfectly. Thank you for watching. Please subscribe our channel and leave thumbs up under the video
