0:00
Here I have Waiko Rainbow Lite and let me show you how to insert here micro sim and
0:09
micro SD card. So at the very beginning let me start by holding a power key
0:14
From the following menu let's choose power off and tap OK to confirm it
0:18
Wait until your device will be completely switched off and afterwards you have to remove
0:22
your back cover. Let's do it by using the cavity at the left edge of the device right here
0:28
Let's simply remove this protection by using your nail finger. Let's do it step by step from the bottom of your device to the top
0:36
Now you have access to your battery. So you can insert a micro sim card without removing your battery so let me do it
0:44
Let's insert this card. This is my micro sim card with the characteristic edge right here and let's simply put this
0:51
card in that position. Let's press it to the end. Now if you would like to insert also micro SD you have to remove your battery so let
1:00
me do it. Then let's insert micro SD with the characteristic edge right here and let's just simply put
1:07
this card in that position and let's push it to the end
1:12
As you can see you can also insert the second micro sim card but in my case let me leave
1:16
it empty. So now let's close the back cover protection and let's reinstall the battery and let me
1:27
switch on my device by holding a power key. Wico rainbow light is turning on let's wait a couple of seconds
1:45
Excellent as you can see now you can remove the screen lock protection and you can use
1:51
your device. Let me check if both cards are working properly. Let's find and select the settings right here
2:00
Let's choose sim cards. And as you can see the device is reading my sim card
2:11
Let's go back. Under device you should find storage. Let's tap it and here you can see that the device is reading our SD card
2:19
So everything went well. Thank you for watching. Please subscribe our channel and leave thumbs up under the video
