0:00
And in front of me is a Nokia 8110 4G from 2018 and today I will show you how to insert
0:13
SIM and SD card. As you can see I have both things right here and one is already in the device but I'll
0:21
also take it out. So start off by powering on the device because we'll need to pull out the battery anyway
0:28
So hold the power key and press it once more when you see the message and now it will shut off
0:36
And then you can flip it over and on the bottom of the device you will see this little kind
0:40
of nut right here so you can just put your fingernail and pop that off
0:46
Like so. And as you can see in the battery there is a SIM 1 and then there is SIM 2 and SD card
0:55
So let's take out the battery by pushing it in like so and out
0:59
Put it somewhere on the side and let's see. First goes the SD card as you can see
1:07
Actually, well no, never mind. First goes the micro SIM which is this one. Right
1:17
Let's see. Yeah. So let me actually put that card in here so it actually fits in there
1:24
Okay. As you can see now it's a bigger one. So you can slide it in
1:32
Like so. And then the SD card goes on the top
1:44
It's like so. So yeah. The SIM card is below. SD card above
1:52
And then for this one what you want to do is to open up the tray, the metal one as you
1:56
can see there is a little metal tray on here. You want to just with your finger push it to the right so like so
2:04
You will feel a click and then it will kind of like flip up as you can see
2:09
Kind of has this hinge. And to put the SIM card in there you just want to place it
2:16
I'm going to put the phone flat so you won't be able to see it for a moment. But like so
2:20
Now let's do some holding it in there because it could fall out
2:24
And while it's laying there with the notch on the top right corner as you can see it's
2:30
right there. The notch. So from this side you just want to close it
2:35
Again make sure that it's actually laying flat and doesn't like move around
2:40
And then you want to press the metal bracket and with your fingernail pull it to the left
2:46
side and you will feel again a click that it locks into place and it's not opening anymore
2:51
so as you can see it's not falling out anymore. And all you need to do then is just put the battery in
2:56
The battery goes only one way so don't worry. And you can turn on the device
3:14
And one of the cards has a pin so I'm just going to put that in. Okay
3:24
As you can see SD card detected. So SD card and the SIM cards are both working
3:32
One of them is catching signal right now the other one not yet but as you can see it's
3:36
in there recognizes that there is a SIM card. Otherwise there would be a little SIM icon with like X on it
3:43
So yeah both of them are working. And that is basically how you insert them
3:49
And if you found this video helpful don't forget to hit like, subscribe and thanks for watching
