0:00
Here I have Wiko Palp Fab and let me show you how to insert microSD and sim card in
0:09
the following phone. First of all hold down the power key for a few seconds, then choose power off and tap
0:15
ok to confirm the whole operation. Wait until your device is completely switched on and then you have to find the cavity at
0:23
the right edge of your phone and simply use your nail finger to open the whole item
0:29
You have to do it carefully step by step from the bottom of your device to the top
0:37
Excellent! And now you have access to your slots and also to your battery
0:43
In order to insert both sim and SD card you have to remove the battery
0:49
Let's do it by using the following cavity at the down edge of your battery
0:54
Now you can insert memory card, in that case it's of course microSD card with the characteristic
1:01
edge right here and simply put this card in the first slot
1:06
Make sure it's pushed to the end and now let's install micro sim card with the characteristic
1:13
edge right here and put this card in that way
1:22
Make sure that both cards suits your device. I leave one slot empty
1:29
Now you can insert the battery, put back the back cover, make sure it's closed properly. Excellent
1:45
Now let's switch on our device by holding the power key and let's make sure that both
1:50
cards are working properly. The Vico smartphone is turning on. Wait a few seconds. Excellent
2:07
Let's unlock the screen. Open and select settings
2:20
Scroll down and choose storage. And as you can see the device is reading our SD card so our memory card is working properly
2:30
and also you can observe that the device is connected to one of the mobile network so
2:35
it means that the sim card is also working properly. Thank you for watching, please subscribe our channel and leave thumbs up under the video
