0:00
Welcome. In front of me is a Xiaomi Poco M4 and today I will show you how you can insert SIM and SD card into this phone
0:13
Now before we get started, you will need to grab a SIM eject tool similar to this one, which will come provided with the device, but if you can't find it, you could also use a paper clip
0:21
There should be one at the end and it should work just as well. Once you have either one of those, take off the case if you have one on your device and then locate the tray, which is located on the upper left side of the phone, right over here
0:36
Grabbing the pen, you want to push it in there and you will see that the tray pops out ever so slightly, enough for you to grab it and yank it out
0:44
On the tray you will have space for two different SIM cards and one SD card. I'm going to occupy one of each tray
0:53
There we go. When you're placing the SIM card, you can occupy either one of these spots, it doesn't really matter, or you can also use both of them if you want
1:03
When inserting the tray back into your device, just do it carefully. There's nothing holding these cards in place, so they could come out loose
1:10
If the tray isn't going back in there easily, don't force it in, just take it out, make sure everything is still in place and then try again
1:19
My SIM card has a pin on it, so once I insert it into the device, it automatically tells me that I need to verify the pin for it, which means that the card is already being detected by the device
1:30
Now, it might not find any kind of reception because the card, I believe, is kind of deactivated, but obviously with the pin, it did detect that there is a card inserted into the device
1:43
Additionally, you did see the pop-up for the Samsung SD card, so the SD card is also being detected without additional steps needed
1:52
So there we go, that is how you insert your SIM and SD card into this device, and if you found this video helpful, don't forget to hit like, subscribe, and thanks for watching
