0:00
Welcome. So today I'll have a little bit of a bigger unboxing apparently
0:12
So in the box, this one, at least there is two of them. One is on the camera just because the table is too small
0:20
We'll have the Trustmaster HOTAS Werthog and also the Trussmaster TPR pedals
0:28
So this, technically, if I'm correct, should be the actual Hotas. So let's get into it
0:37
Now the box is actually not the lightest one. There we go
0:57
Let me stand up for this. So here we go. I can kind of see it right here
1:09
Let's just eat that out. There we go. This has some hefty to do it more than I would have actually expected
1:24
So let's just pop it open. How am I supposed to figure that out
2:02
Okay, so we got on one side
2:16
Let's get this out as well. So right now I have a box inside of a box inside of two boxes. Great
2:35
So let's pop this open. So it looks like this is the joystick
2:43
Oh, the stick. See, I guess probably this way to take it out would be just to flip it upside down
2:52
So that's what I'm going to do right now. Go. Oh, so that actually comes in like pieces
3:18
Oh damn that actually Just this has some hat I thought that this would be plastic That is not And then we got the super hefty base
3:35
There we go. I'm gonna move this to the side for now
3:46
And let's get into the throttle. Get the same logic, let's just flip it upside down
4:02
Okay, whoa, where are you going
4:21
I can see this actually like when I'm just letting it go completely shake the table
4:33
Okay so... Now this is all made out of, would seem to be like metal, at least the half of it would imply
5:01
Now it does have rubber feet so that's at least nice, it won't scratch my desk
5:21
And the last piece right here
5:31
And last piece right here. It's actually starting to
5:51
condensed right now because it is super cold and all this room isn't necessarily the most
5:59
well ventilated area so probably we'll be plugging in and plugging it in for a
6:05
little bit at least till the temperature of it equalizes because you literally see
6:09
let me just move it in the light and that will be visible because this is all
6:15
metal you can see it literally condensed right now so yeah I'm gonna let it
6:21
Let it rest for a moment. Now one thing that I'll mention this right here is plastic
6:29
and there is no condensation on it, but the size of it, oof, you can see it right here
6:35
Yeah, it's getting a little bit gnarly right now. Anyway, I'm going to move this to the cipher, at least for the moment. And..
6:46
Damn Let get this Let get this also right here Now this is even bigger And let me guess it going to be a box inside of a box
6:58
Oh, I was actually wrong
7:13
Now I'll place it down on the ground just because this box is a little bit unwieldy
7:17
wheelie is taking up the entire desk right now. So I think the easiest way for me to
7:21
actually take it out would be just to put it down on the floor. Let's do it up
7:40
Just kick that on the table just so I can stand somewhere. One thing that I'll mention, there is actually an easy way to take it out
7:51
As you can see, you can grab it right here. So you have places to literally grab it from either side
7:57
So it's actually quite nice. Let's slip it over. Okay, so it looks like we've got one petal right here
8:11
Again, some black of metal. Okay, this is actually a little bit better than I expected
8:32
So the cable right here. We got some keys, you can basically assemble this
8:42
And let's see. There we go
8:59
There is one another pedal on this side. So quickly take it out, then we go
9:11
And I have literally no place to stand almost in here. Go straight
10:16
Whoops that could be still Okay, so I've seen
10:42
Okay, so I assume this is for this side. Here we go
10:57
Now right here we have two little screws. So let's take them off
11:12
I can regulate how far, or how much linear on this
11:22
It will basically just by switching how far this is positioned, even though we can't see it
11:28
So let me just flip this over. Hopefully this will help. There we go
11:35
Come on. Now my light just stopped working for some odd ones
11:41
for some odd reason. Oh, come on. There we go. As you can see there is this little thing
11:56
and you have holes right alongside here. So just place it however far you want it to be leaning
12:03
And screw it in. Now I'm not going to screw it and complete
12:07
This is just kind of more of a wake assembly. if I can actually get it in there
12:12
I can go. There's one of these
12:34
There's one of these. So as you can see, Okay, so it's basically between terra and boxing
12:46
There's not much more in the box. So yeah, here we go
12:53
So let me move everything into the shot right here. You can get an idea
13:00
So you need a little bit of space for all this. Probably the thing that takes the most space actually is a little frattle right here
13:08
This is, actually no, this is probably the thing that takes most space just because of the actual base, as you can see
13:17
This thing has some heft to it. So there's my hand in comparison
13:24
So yeah, anyway, so basically conclude the video, and if you found this video helpful
13:29
don't forget to hit like, subscribe, and thanks for watching
