0:00
Here I have Yumi E-Max mini and I'm going to show you how to insert a microSD card and
0:10
SIM card in this device. At first hold down the power key for a few seconds, tap power off and wait until your
0:18
phone is completely switched off. Afterwards let's find the cavity of the down right edge of your phone in that corner and
0:29
simply use your nail finger to open the back panel. Let me show you
0:40
Do it step by step from the bottom of your device to the top. Excellent
0:49
Now you have access to your slots. There are two slots for SIM cards because it's a dual version
0:57
Let me insert one of the card. This is a microSD, microSIM card and let me insert in that slot this card
1:07
This is the characteristic edge of this SIM card and you have to put it that way
1:13
Let me show you one more time. Simply insert it here
1:26
Put it to the end of the slot. Make sure that the card suits to your device
1:32
And now let's install a microSD card. Here I have one of the following card and this is a microSD slot
1:42
You have to put this card in that direction. This is the characteristic edge and let me put it right here
1:53
Let me show you one more time. Here and push it to the end
2:00
Let me show you again. This is my card. It should be put that way and let me push it to the end of the slot. Excellent
2:13
Both cards are installed. Let's put back the back panel to our device
2:25
And let me switch on my phone by holding the power key
2:31
The device is turning on. Well done
2:42
As you may observe at the top of the screen the phone is connected to one of the mobile
2:46
network so it means that the SIM card was installed properly. And now let's find out if our microSD card is working
2:55
So tap apps icon, go to settings, scroll down and choose storage
3:02
And as you may notice SD card is working so everything went well
3:07
Thank you for watching. Please subscribe our channel and leave thumbs up under this video
