0:00
Welcome. Infoomone is a Nord
0:04
What one is it? Let me quickly check. So this is the Nord CE2 Light
0:09
And today I'll show you how you can apply a temperate glass to this phone
0:18
Now, I'll be using a temperate glass for a little bit of a different device
0:23
You can probably read right here, but because the screen size is virtually the same
0:28
This won't really make much of a difference. As you can see when you place it on here, it fits perfectly
0:33
The only difference between most likely a glass that is designed specifically for this phone
0:39
is the fact that it will have a hole punched camera for the camera, kind of like the pre-applied foil does
0:46
As you can see, there is one applied. So that's kind of the difference
0:50
But anyway, even with that, it will work just fine. So that's what I will be using
0:55
But obviously, I would recommend you to get a correct one. And this is just the one that I have on hand. I don't have a specific one for this phone
1:02
although I have like paste the entire box of temperate glasses, so that's kind of why I'm
1:06
using a different one. Anyway, to start off, apart from the temperate glass, you should also
1:11
have in here, there we go. One of these things, a wet and dry wipe. You can use those if you
1:17
want to, or you can just completely disregard this because they are absolutely horrendously small
1:21
oh oops there we go ah so you can see the sheer size of them It mind
1:35
So you can use those if you want to or you can disregard them. Now this one here is actually wet but sometimes and I will point that out the wet
1:44
wipes have just dried out from laying around so they are no longer wet and that really
1:51
makes them just useless altogether. So what I recommend using instead, or at least what I will be using instead
1:58
is a microfiber cloth. This works fine for me. It works really well
2:02
and that's kind of what I'm always using for this. So anyway
2:07
before I start getting the phone prepared for it, I will quickly go over how I actually apply the tempered glass
2:15
at least how it works for me. I don't know if everybody does it the same way
2:20
You might have a different, and this is just the way that works for me. So if you have a hole punched camera or a notch
2:27
as for instance glasses like these do, as you can see there is a notch
2:31
If you have a notch or a whole punched camera because this kind of applies to every phone
2:35
not just this one, what I recommend you do is once you peel off this protective layer
2:40
which I would go this way in this case, you would want to apply the hole or notch
2:46
along with the camera first and then make sure that it aligned correctly at the top side so left and right top side So it not like this where for instance the right side on the top is like way closer to the bezel rather than the one on the left
3:02
So just make sure that it would be in the middle, right? And what I do then is I kind of pinch the bezel of the phone along with trying to just get a grip, a tiny bit of grip on the actual glass itself
3:17
So I can feel if it's right in the middle of the phone. the display so it's not like too much to the left or the right and from there I'll
3:25
start laying it down because it is a look at the moment at like an angle as you can see so it doesn't
3:31
stick to the screen so when it's like this I'll then start lowering it and apply the same logic
3:37
of pinching it with the bezel on the bottom side while starting to apply pressure at the bottom
3:43
so it won't move uh you know to the sides and from there well it's being pressured down I'll just
3:50
gently place it down and it should go just like perfectly in its place
3:57
So that's the way I do it. Now anyway, now that we get that out of the way, let's prepare our display
4:05
Stay? There we go. So let's wipe off the display. As you can see, it is a little bit smudgy right now
4:13
So just try to get rid of everything that you can from it. Now I am keeping the screen protector in place just because it is acting as a nice bumper for the tempered glass to go in place
4:31
If you place it in Crooked, when you don't have your protection, like the case, when you apply it, it will lift up the tempered glass
4:41
So having it on actually allows you to easily make sure that your tempered glass went in correctly in its place
4:49
supposed to be and if it if it's still like a little bit to the side it just
4:54
won't stick so you can then easily use a fingernail and pry it up and try to
4:58
reapply it in a more centered way so anyway now that the screen is ready
5:04
there's no dust on it so I'm gonna quickly just get straight to it so I'll go
5:10
apply it from the top And there we go. Just can see perfectly applied to the screen
5:33
So there again, that's how you can apply your temperate glass. And if you found this video helpful, don't forget to hit like, subscribe, and thanks for watching