0:00
Here I have Huawei MediaPad M1 and let me show you how to insert here the microSD and
0:09
microSIM card. So at the very beginning let's start by holding a power key
0:14
Let me switch off the tablet, so let's hold down power, let's choose power off and tap
0:19
OK to confirm it. Wait until your device will be completely switched off and afterwards let's go to your
0:25
back panel and here you should open this panel, this down panel by using the cavity at the
0:33
left edge of the device, let's use an 8 finger and here you can insert 2 cards
0:39
This is the place when you should insert the microSD card, let me do it
0:43
Here I have my card with the characteristic edge right here and let's put this card in
0:47
that position and press it to the end. Now let me use the microSIM card right here with the characteristic edge right here and
0:56
let's put this card into this slot. Let's press it to the end, you should hear the characteristic click and then let's close
1:05
the protection. Let me press power key right here to switch on the device and check if both cards are
1:17
working properly. The Huawei MediaPad M1 is turning on, let's wait a couple of seconds
1:33
Let me unlock the screen, so let's slide to unlock. Let me find and select the settings, as you can see my language turned into the language
1:42
from SIM card, so let me just quickly change my language
1:56
Excellent and then from the settings list let's find and select the storage
2:04
It should be located under device tab right here and as you can see the device is reading
2:09
our SD card and also you can see right here that the device connected to one of the mobile
2:17
network, so it means that both cards are working properly. Thank you for watching, please subscribe our channel and leave thumbs up under the video
