0:00
Here I have Manta MSP4007 and let me show you how to insert both SIM and SD card in
0:11
this device. First of all hold down the power key for a few seconds, then tap power off and wait until
0:17
your device will be completely switched off. Afterwards you have to remove the back cover
0:22
The best way to do it is by using one of the phone's corner
0:26
Let's use this corner and simply use your nail finger to open the whole item
0:33
And now you have access to your slots. But first you have to remove the battery
0:38
Let's remove the battery by using the cavity at the down edge of the phone and simply remove
0:43
the whole item from the device. Now you can insert here two SIM card and one memory card
0:51
Let's start with SIM card. This is the first slot so let's put this card as simple as that right here
1:00
Make sure it's used to your device. And now you can insert memory card
1:04
In that case it's of course microSD card with the characteristic at right here
1:09
Simply put this card in the third slot in that position. Let me show you
1:16
Let's do it gently. Let me do it one more time. Excellent
1:27
Both cards suit to our device. Now let's insert battery and let's put back the back cover. Ok
1:41
Let's use power key to switch on our device and to check that both cards are working properly
1:47
Let's check if the Manta is turning on. Excellent. Let's unlock the screen
2:01
As you may notice at the top of the screen the device is connected to one of the mobile network so it means that our SIM card is working properly
2:08
Now let's tap apps icon, find and select settings, choose storage and as you may
2:17
observe the device is reading our SD card. So everything went well
2:22
Thank you for watching. Please subscribe our channel and leave thumbs up under this video
