0:00
Here I have a GoClever Quantum 2 50Zero Lite and let me show you how to accomplish inserting
0:11
SIM and SD card in the following phone. First of all hold down the power key for a few seconds
0:17
When the phone's options appears on the screen choose Power Off and tap OK to confirm
0:21
the whole operation. Wait until your device is completely switched off and afterwards you have to find the cavity
0:28
at the right edge of your phone. Simply use your nail finger to open the whole item
0:34
Let's do it step by step from the bottom of your device to the top
0:42
Let's do it carefully. And now you have access to your slots, but first you have to remove the battery by using
0:52
the following cavity. Use your nail finger one more time and now you can insert here two SIM cards
1:01
One regular SIM card and one micro SIM card. Let's start with regular SIM card and you have to put it right here in the down slot
1:13
of your device. Let me show you. Excellent. Let's push it to the end and you have to do it in the right position, so you have to
1:29
have this characteristic edge right here and let's insert this card that way
1:37
Ok, let's push it to the end. Now let's insert memory card, of course it's micro SD card with the characteristic edge
1:49
right here and simply put this card in that slot. I leave one micro SIM slot empty
2:02
Now let's put back the battery, insert the back cover and let's switch on your device
2:12
by holding the power key. The go clever is turning on
2:27
And now you can unlock the screen
2:39
As you can see the device is connected to one of the mobile networks, so our SIM card
2:43
is working properly. Let's go to settings, scroll down and choose storage and as you may observe the device
2:54
is reading our SD card, so everything went well. Thank you for watching, please subscribe our channel and leave thumbs up under the video
